bids are invited for custom bid for services - design ,fabrication, supply and installation of ss name board - supply, fabrication, and installation of a stainless steel (ss) name plate of overall size 10 feet × 8 feet made from 2 mm thick ss sheet (grade 304). the plate shall have smooth edges, properly cut and finished with buffing/polishing to achieve a glossy/mirror finish as required. all corners shall be rounded for safety. the name plate shall be supported with a suitable ss frame or stiffeners at the back to prevent bending or deformation. all materials, labour, tools, and transportation shall be included in the scope, and the work shall be executed as per site requirements and officer-in-charge approval. the inscription on the name plate shall be executed by laser engraving on ss 304 surface, followed by filling of engraved portions using high-durability epoxy/pu enamel paint of approved shade, suitable for outdoor exposure. the content shall be displayed in three languages: tamil, english, and hindi. the exact text content, layout, typography, and logo details shall be provided by the officer-in-charge prior to execution. the contractor shall prepare an artwork for approval before fabrication. , supply, installation, testing, and commissioning of led spotlights for illumination of stainless steel (ss) name plate. the lights shall be energy-efficient, weatherproof, and suitable for outdoor use. the led spotlight shall be of die-cast aluminium housing with powder-coated finish, having ip65 or higher protection against dust and water. the fitting shall be equipped with high-brightness led (minimum 15w or higher as required to achieve uniform illumination of the name plate). , supply and fabricated made of structural steel using ismc sections shall be properly aligned and securely fixed to the name board frame using ismc 75 × 40 channels welding of suitable size and strength to ensure rigidity and stability. the legs shall be embedded in concrete foundation of appropriate size (minimum m20 grade) with a sufficient depth to provide firm anchorage and resistance against wind loads. all welding joints shall be ground smooth and cleaned of slag. the entire surface of the ismc legs shall be thoroughly cleaned, derusted, and applied with one coat of zinc phosphide yellow primer followed by two coats of synthetic enamel paint of approved shade for corrosion protection and durability. , supply and fixing of 16 , two-pole mcb with enclosure box shall be of high-quality, isi-marked make conforming to relevant is standards. the mcb shall be suitable for 230/415v ac supply, with a current rating of 16a and shall provide protection against overload and short circuit conditions. the enclosure shall have a hinged cover with proper locking arrangement and provision for cable entry and exit. all terminals shall be properly tightened with suitable lugs, and internal wiring shall be neatly dressed. the complete unit shall be installed, tested, and commissioned to ensure safe, reliable, and efficient operation. , supply and wiring shall be carried out using 3 core × 2.5 sq.mm copper conductor cable of high conductivity, insulated with pvc pipe and conforming to relevant is standards, suitable for 1100v grade. the cable shall be drawn through rigid pvc conduit pipes of appropriate diameter, which shall be of high-quality, heavy-duty type and conform to is specifications. the pvc conduit shall be properly laid on surface or concealed as required, using suitable accessories such as bends, couplers, junction boxes, and saddles, ensuring neat and secure installation.