tender for wbm grading 3:- providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density grading- 3 as per mord technical specification clause 405. , patch repairing / maintenance of bituminous surface road using jhama brick aggregate & viscosity graded bitumen (vg-30) repairing pot-holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50 m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling up with with jhama chips using bitumen of vg-30 @ 54 kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/ sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/ sqm of prepared road surface as per direction of the engineer-in- charge and all as per mord technical specification clauses 1900, 502, 503 and 504 , tack coat using hot straight run bitumen of grade vg-30 on w.b.m. providing and applying tack coat using hot straight run bitumen of grade vg-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: on w.b.m. @ 0.75 kg/ sqm. , tack coat using hot straight run bitumen of grade vg-30 on bituminous surface. providing and applying tack coat using hot straight run bitumen of grade vg-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specif