tender for various civil maintenance work in various residences located at nehru enclave ministers residence.- 1 providing & fixing float glass panes 5.00 mm thick glass panes (weigh not less than 12.50 kg/sqm) (dar -9.7.7.2) 2 providing and fixing c.p. brass long nose bib cock of approved quality conforming too is standard and weighing not less than 810 gms , ( 15 mm nominal bore) 18.50.1 3 providing and fixing c.p. brass stop cock ( concealed) of standard design and of approved make conforming to is 8931 ( 15 mm nominal bore )18.52.1 4 providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 ( m15 mm nominal bore)18.53.1 5 providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. (dar -9.84) 6 fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading (dar -9.7.8) 7 providing and fixing isi marked flush door shutters conforming to is: 2202 (part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply vereering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel bolt hinges with necessary (dar -9.21.2) 8 providing and fixing water closet squaiting pan (indian type w.c pan) with 100 mm sand cast iron p or s trap. 10 liter low level white p.v.c flushing cistern. including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required white vitreous chin orissa pattern w.c. pan of size 580x440 mm with integal type foot rests. (17.1.1) 9 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. white vitreous china wash basin size-630x450 mm with a pair of 15 mm c.p. brass pillar taps. (17.7.1) 10 providing and fixing stainless steel a isi 304 (18/8) kitchen sink as per is : 13983 with c.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever requried kitchen sink with drain board. 510x1040mm bowl depth 250 mm (17.10.1.1) 11 providing and fixing 8 mm dia c.p./s.s. jet with flexible tube upto 1 meter long with s.s. trangular plate to eureopean type w.c. of quality and make as approved by engineer-in- charge. (17.16a). 12 providing and fixing pvc low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231 with all fittings and fixtures complete 10 litre capacity white. (17.18.1). 13 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (17.31). 14 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete dsr 13.88 15 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(d.s.r item-13.80) 16 distempering with 1st quality acrylic distemper(ready mixed ) new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour.dsr-13.41.1 17 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. dsr 13.62.1 please enable macros to view boq information