tender for e-quotation for seeking firm rates for non-schedule items for preparing estimates. , supplying , installation, testing and commissioning of vertical turbine pump set with ss impeller capable to discharge 126 m3/hr.against total head of 50 m, (make kirloskar/jyoti/wilo-mather&platt/wpil) coupled with suitable capacity vertical hollow shaft/solid shaft squirrel cage induction motor , rating of motor 20% more bhp than that of pump (make kirloskar /abb /cgl/ siemens) operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply , ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,with heavy duty m.s. column assembly with ss line shaft and each coloumn of 5 feet length including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, strainer-1 no, m.s. channel base plate etc. all complete including cost of taken out existing old pumpset. , supplying and installation of fasd starter suitable for above mentioned vt pumpset make lk/bch/schneider. , supplying and laying of 25 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor. , supplying, installation testing and commissioning of horizontal split casing centrifugal pump set with bronze impeller having discharge 126 m3/hr. against total head of 35 m, (make - kirloskar/jyoti/wilo-mather&platt/wpil), coupled with suitable capacity squirrel cage induction motor, rating of motor 20% more bhp than that of pump(make kirloskar /abb /cgl/ siemens) ,tefc, ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply, mounted on a commonm.s. base plate including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, foot valve-1no, etc. all complete including cost of taken out existing old pumpset. , supplying and installation of fasd starter suitable for above mentioned c/f pumpset make lk/bch/schneider. , supplying and laying of 16 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor. , wiring for light point / fan point/exhaust fan point with 1.5 sq.mm fr pvc insulated copper conductor single core in surface pvc conduit, piano type switch, phenolic laminated sheet with suitable size pvc/ms box etc as required at pump house at intake well and clear water pump house. 15 point. , cost towards complete repairing of control panel at intake well with changing of damaged parts such as :- 1.150 annual periodical maintenance tpn mccb,50 ka -1 no. as incoming feeder. 2. 75 annual periodical maintenance tp mccb, 50 ka-2no as outgoing feeder. 3.star delta timer-2nos(one for each starter) 4. 32 annual periodical maintenance switch fuse unit -01 no. for internal and external light load. 5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load . , cost towards providing all labour, tools and technicians for taken out and dismantling 40 hp vt p/set with bowl assembly, 6 dia. coloumn pipe and line shaft etc all complete. , cost towards dismantling and repairing of complete bowl assembly. , cost towards making supplying and fitting s.s. top shaft as per size and sample. , cost towards making supplying and fitting of c.i. spider bearing having od 6.5 with rubber bush as per size and sample. , cost towards lowering of vt p/set. after complete repairing and assembling works. , cost towards complete repairing of control panel at clear water pump house with changing of damaged parts such as :- 1.125 annual periodical maintenance tpn mccb,50 ka -1 no. as incoming feeder. 2. 63 annual periodical maintenance tp mccb, 50 ka-2no as outgoing feeder. 3.star delta timer-2nos(one for each starter) 4. 32 annual periodical maintenance switch fuse unit -01 no. for internal and external light load. 5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load .