supply of ms /bright steel rounds , ms rounds 6 mm dia to specification is:2062-2011 or latest grade e 250a killed quality in 3 to 5 metres length. marking and colour coding shall be as per icf/m/d/spec n.113 issue status 01, rev.00, with amendment nos -1 and 2. the supplier will submit a tes t certificate for each heat which will contain both physical and chemical properties. s pecial condition : suitable packing to be done to avoid damage during transit, unloading and rust prevention during storage [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] , bright steel rounds 8mm dia cold drawn to pecn.is:9550-2001(surface quali ty as per tab.5 of class.3)with the following chemical and mechanical properties.chemi cal composition:sl.no. description max%1. carbon0. 23 2. manganese 1.5 3. sulphur 0.054. phosphorus 0.055.silicon 0.4 carbon equivalent max.0.42%. mechanical properties:1. ten sile strength540-790(min) mpa 2. elongation (min)13%tolerance on diameter shall be h11 a s per table 2 to is:9550-2001.the bright steel rounds shall be supplied in 3 to 5 metres length with maximum 10% shorts down to 1 metre. marking and colour coding shall be as per clause 2 of icf/md/specn.113. issue status-01, rev.00 with amendment nos 1 and 2 t he supplier shall submit test certificate for each heat which will contain both physical and chemical properties. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ]