tender for inviting eniq for the purpose of market rate analysis, updatation of departmental sor (schedule of rates) and preparation of estimates for supply of different materials utilized in minor irrigation installations under water resources investigation and development department. , electromotor pump sets, en 733 for pump and is:12615 for motor , end-suction centrifugal pump with back pull-out design having discharge of 200 m3/h and head of 18 meter with 20hp 3 phase tefc squirrel cage 4 pole induction motor, efficiency class: ie-2, duly isi marked, 1500 rpm, 415 volt ac, frequency 50 hz, frame size: 160 l, duty: s-1 (continuous), ip-55, insulation class: f, connection: star delta. pump motor should be properly coupled with tyre type coupling and mounted on ms base frame. , electromotor pump sets, iso 2858/is 13518 for pump and is:12615 for motor , end-suction centrifugal pump with back pull-out design having discharge of 200 m3/h and head of 18 meter with 20hp 3 phase tefc squirrel cage 4 pole induction motor, efficiency class: ie-2, duly isi marked, 1500 rpm, 415 volt ac, frequency 50 hz, frame size: 160 l, duty: s-1 (continuous), ip-55, insulation class: f, connection: star delta. pump motor should be properly coupled with tyre type coupling and mounted on ms base frame. , end-suction centrifugal pump with back pull-out design having discharge of 200 m3/h and head of 24 meter with 25hp 3 phase tefc squirrel cage 4 pole induction motor, efficiency class: ie-2, duly isi marked, 1500 rpm, 415 volt ac, frequency 50 hz, frame size: 180m, duty: s-1 (continuous), ip-55, insulation class: f, connection: star delta. pump motor should be properly coupled with tyre type coupling and mounted on ms base frame.