bids are invited for custom bid for services - wiring of community hall for installation of air conditioner(ac ) to be installed for majri area - supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb-lt/al, sor no 7-1-19 , providing & erecting epoxy outdoor / indoor end termination kit for lt xlpe armoured cable 70 to 120 sq mm., with necessary material as per specification no. cb-jt/lt, sor no 7-4-10 , supplying & erecting crimping type aluminium lugs for cable 95 sq mm complete as per specification no. cb-cl/al, sor no 7-10-6 , providing & erecting floor/wall mounting, mccb panel board, with door, suitable for four pole incoming 250a, 6 ways four pole outgoing, up to 100 a mccbs on iron frame, as per specification no sw-swr/mccbpb. (excluding mccbs), sor no 5-7-3 , providing & erecting 3 pole mccb 415v, 400a, rated short-circuit breaking capacity 36 ka (ics=100% of icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ uv/ trip alarm contact and mccb should have phase barriers both sides, with insulation withstand capacity 800v, no line-load bias in provided enclosure /panel as per specification no. sw-swr/mccb, sor no 5-5-4 , providing & erecting 3 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact. mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb, sor no 5-5-1 , providing & erecting incoming and outgoing cable alleys suitable for mccb panel board with door, 250a incoming and 6 way outgoing or 400a incoming and 4 way outgoing made from crca sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and db., sor no 5-7-13 , supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb-lt/al, sor no 7-1-29 , supplying, erecting & marking fpmcb 40a to 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb, sor no 5-3-13 , supplying, erecting & marking spmcb 6a to 32a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb, sor no 5-3-3 , supplying, erecting & marking spmcb 6a to 32a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb, sor no 5-4-10 , supplying and erecting pvc insulated pvc round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper industrial cable for voltagegrade up to 1.1 kv, sor no 1-3-16 , ac mcb box with 3 pin top 25a (non sor item) (box and top pin included) (qutation attached), sor no non sor mcb box , supplying and laying hms pvc conduit frls grade 25 mm dia with necessary accessories in rcc work/false ceiling/false flooring as per specification no. wg-ma/cc., sor no 1-1-10 , supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (dwc) of hdpe for enclosing cable below ground/road surface, to required depth complete., sor no 7-6-10 , making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose)., sor no 16-3-7 , supplying and erecting single pole and neutral distribution board (spndb), with 2 ways for incoming and 6 ways (6 poles) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw-swr/mcbdb, sor no 5-4-8