tender for amrut-2.0 - madathil thodu kulam renovation project at kondotty municipality- (project no. 9150- 2 50.2.3.1pumping or bailing out water and removing slush etc by using pump set includingn cost of labour, oil hire charges of pumpset, etc complete 3 15.9.2demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer -in- charges:in cement mortar 4 2.6.1earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil 5 od392746/2025-2026earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, disposed earth to be leveled and neatly dressed. deepening depth (1.5 m to 3 m) 6 2.8.1earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 7 13.33.1pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):flush/ ruled pointing 8 4.1.6providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) 9 4.1.3providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 10 5.9.1centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 11 5.22.6steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 12 16.91.1providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern 13 10.26.1providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.m.s. tube 14 13.62.1 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .