tender for annual plan-nannambra gp-minimast light installation in ward 1-so140/26-general electrical work , electrification , 90.15.1.1:supply installation testing and commissioning of octogaonal pole made of hot dip galvanised gi sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per is 875 part iii fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing reinforced cement concrete foundation and junction box etc, complete 8 meters , 90.15.4.8:supply conveyance, installation, testing and commissioning of 120w led flood light output greater than 105lumen/w 4000-6000 k with ip 66 protection led chip make cree/lumilled/nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 kv,and aluminium pressure die-cast powder coated housing, acrylic cover complete with thd less than 10%, power factor greater than 0.98, rohs compliant, duly wired up for use on 230 v ac supply. driver compartment should be seperatly accessible for maintenance (lm 79&80 certificates from nabl accredited third party lab to be produced mentioning chip manufacturer) , 14.1:excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. , 14.10:providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, dg set etc. including form work etc. as required (excluding reinforcement). , 14.12:providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels , od188333/2025-2026:steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding al