tender for signages - 1 signages 2 ms sheet / structure :-thickness of ms sheet : 2mm thick galvanized sheets ms angle: isa 40x40x5 @ 3.0 kg/m ms pipe section : square hollow section [email protected] kg/m as per attached architect design including labour & material. 3 acp ( aluminium composite panel):- thickness of acp panel: 4 mmbrand of acp (aludecor, viva, alstone, eurobond and pioneer panels): alstone & euroband as per attached architect design including labour & material. 4 stone:- type of stone(granite /marble /sand stone): sand stone engraving/ printing method (etching/ vinyl/paint ): etching as per attached architect design including labour & material. 5 paint:- paint : after cleaning red oxide primer +two coats synthetic enamel paintsynthetic enamel paint brand (asian/nerolac / dulux/ burger/ birla opus): asian / dulux/ burger red oxide primer brand ( asian/ nerolac/ dulax/ burger/ birla opus): asian /dulux/ burger 6 foundation:- foundation size : it is 450 x450mm m 20 grade reinforced cement concrete that is 150 mm thick over 100 mm thick plain cement concreate with a 75 mm offset all around rcc. rcc is made up of 10 mm diameter ms bars with 150 mm c/c on both faces. it consists of an rcc column that should be cast 300 mm above ngl and has four 10 mm diameter m s bars and 8 mm diameter ms bar stirrups at 150 mm c/c. as per attached architect design including labour & material. please enable macros to view boq information