supply of electrical panel enclosure , electrical panel enclosure - 2200 (h) x 1200 (w) x 800(d) with following description: 1. size: 2200 height x 1200 width x 800mm depth of double door. 2. material: crca (cold rolled close annealed) sheet steel. 3. structure: 2mm thickness (14 swg) for panel structure and 1.6mm (16 swg) for doors and covers. 4. base frame: a 200mm high channel base for mounting and cable entry. 5. paint finish: epoxy po wder-coated with 7- or 10-tank pretreatment for corrosion resistance, typically ral 7032 (siemens grey) or ral 7035 (light grey). 6. doors: front and rear doors with stiffeners, neoprene/pu foam gaskets (for sealin g), and lift-off hinges with key-lockable handles. 7. ventilation: louvered ventilation slots with air filters. 8. protection: ip65/ip66 (dust-tight and water-resistant for harsh environments). 9. mounting plates: zinc-plate d or painted mounting plates for mounting plc racks, smps, and relays. 10. gland plate: 3mm thick detach able gland plates for bottom or top cable entry. 11. earthing: copper earthing busbar (25x5mm) at the bott om, with copper braided straps to connect all doors and side panels. 12. lighting/power: internal led lighti ng with limit switch and 230vac 5 pin socket. 13. document holder: a pocket attached to the inside door. [ warranty period: 12 months after the date of delivery ] ]