tender for to carry out works under the rajmata ahilyadevi holkar memorial in pandharpur city. - excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming. watering including shoring and strutting, dewatering etc. complete. (lift upto 1.5 m.) by mechanical excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering providing soling using 80mm size trap metal in 15 cm. layer including filling voids with crushed sand/grit ramming, watering complete. providing and laying cast in situ/ ready mix cement concrete in m-15 of trap/ granite/quartzite/ gneiss metal for steps including steel centering, plywood/steel formwork, laying/ pumping. compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (wooden centering will not be allowed.), with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand v.s.i. grade). providing and laying cast in situ/ ready mix cement concrete m-30 of trap/ granite/quartzite/gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete with fine aggregate (crushed sand v.s.i. grade).