tender for equipment items-- 1 dual output regulated dc variable power supplydual output regulated power supply- input voltage: 230v/50hzac- output voltage: (0–30v)dc- output current: (0–2a)dc- protection circuit: over voltage and over current protection, short-circuit protection- high efficiency: greater than 85%- low ripple and noise: less than 50 mv 2 digital storage oscilloscopebandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v–240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div – 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div – 10 v/div (at input)waveform math: +, -, x , ÷, invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions 3 digital ic trainer kit with breadboard5v dc, 1a regulated power supply±12v dc / ±15v, 200 ma regulated power supplysolderless breadboard to accommodate 8 × 16-pin icszif (zero insertion force) ic socketssupports ttl and cmos icslogic io leds for output monitoring8 buffered led outputs8 debounced switch inputsttl clock: 1 mhzvariable clock generator: 0.5 hz to 50 hzsingle pulse output: 100 ms (buffered, positive and negative outputs)one seven-segment display with 4 bcd inputsbuilt-in logic probesbuilt-in logic switchesexperiments on basic logic gates, flip-flops, counters, and multiplexers 4 pcb prototype machinepcb prototyping & antenna fabrication systemmanual software copper cam & mach3 millresolution (x/y) 3.125 micro meterworking area (x/y/z)(mm)200x300x120 mmminimum width line & space in mm0.1 (4 mil) max travel speed (mm/sec)58 (2.28 “) drilling (mm), 0.2 -3.175 (8-125 mil)maximum drilling cycles/ min 50main axle power rate 300 wmain axle rotating speed 25000 rpmmax working speed 3500mm/minfeeding height 120 mmworking drive 0.02-0.05mmrepositioning accuracy 0.01-0.02mmsupported format standard gerber,dxf,excelloncapability of processing various materials - fr4, copperclad, acrylic, metal, aluminum and etc.,power - 220 v acweight - 52 kg please enable macros to view boq information = limited