tender for supply and fabrication of m s bins capacity 1.25 cmt for compactor and 4.5 cmt for skip loader for sanitation department of the pune cantonment (2nd call)special instructions :1. tthe bidder will also do the arrangement that all steel work shall be followed by two coats of primer and two coats golden yellow synthetic enamel paint. 2. a fabricated s le container may be supplied for approval . letters should be pcb hindi and english with word keep cantonment clean and green. 3. the bidder should quote the rate per no inclusive of all taxes. , fabrication of ms bins for skip loaders as well as compactor , fabrication of m s bins capacity 1.25 cmt for skip loader as per the attached sketch and specimen available in this office. all welded steel construction with stipulated wall using ms sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. two adequate support should be provided at the bottom for ground clearance.all wheels of the containers should be of m.s , fabrication of m s bins capacity 4.5 cmt for skip loader as per the attached sketch and specimen available in this office. all welded steel construction with stipulated wall using ms sheet 3.15 mm thickness on all sides and bottom and angles on proportionate thickness with two adequate lifting handle bar welded through and through. two adequate support should be provided at the bottom for ground clearance.all wheels of the containers should be of m.s