tender for carriage of following material from store center or from any other place to the respective site of work distence up to 75 km through the kachha pacca road including the work of its loading & unloading at the respective ends also including the work of its dragging etc. and also including the cost of labour, t & p and carrier etc. required for proper completion of work. , steel tubler pole sp-55 11.00 mtr , steel tubler pole sp-55 13.00 mtr , plain cement concrete pole 9.0 mtr long , 33 kv steel cross-arm 100x50 mm v-type , a.c.s.r. dog conductor , 33 kv 3*300 xlpe cable , barbed wire , stay complete set , ms top channel 125x65x5x3200 mm , 33 kv polymer disc insulator (b&s) 70 kn , disc fitting (b&s) 70 kn , brecing angle 65x65x6x4300 mm , earthing complete , polymer ic 33 kv pin insulator , ms top channel 33 kv line top bolt , supply & erection of following material as per uppcl/dvvnl/respo norms and standard/related is , hdpe pipe pe-80, pn-6, dn-140 mm dia pipe for laying of 11 kv , h/s o/d 11 kv 3*300 sqmm. j/kit , stone pad 300x300x75 mm , ms nut and bolt off size 4x2.5 , clamp for 33 kv v-type cross arm with bolt , number plate with clamp and n&b , danger board with clamp and n&b , pg clamp for dog to dog conductor , f- clamp for plain cement concrete clamp & st pole 33 kv , e- clamp for plain cement concrete clamp & st pole 33 kv , aluminium paint , red oxide , loop insulator , erection of following material including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work. (with proper earthing.) , erection of plain cement concrete pole 9 mtr long including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work. , grouting of plain cement concrete pole 9 mtr long as per respo norms ( cement, sand , blast stone with the ration 1:4:8 will be provided by contractor ) , erection of s.t.p pole 11/13 mtr long including the work of complete h.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t & p and carrier etc. required for proper completion of work. , grouting of stp pole 11/13 mtr long as per respo norms ( cement, sand , blast stone with the ration 1:4:8 will be provided by contractor ) , fixing of stay rod and its erection. stay wire should be properly binded and tightened as per standard specification. , grouting of stay set as per respo manual and also including the cost of all grouting material, labour, t & p etc. required for proper completion of work. , laying, sagging, stringing, binding and jumpering etc. of acsr dog conductor on the newly erected pole/ old pole as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work. , laying, sagging, stringing, binding and jumpering etc. of 33 kv 3*300 xlpe cable on the air/underground as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t & p, carries etc. required for proper completion of work. , 33 kv steel cross-arm 100x50 mm v-type , barbed wire , ms top channel 125x65x5x3200 mm , 33 kv polymer disc insulator (b&s) 70 kn , disc fitting (b&s) 70 kn , brecing angle 65x65x6x4300 mm , earthing complete , polymer ic 33 kv pin insulator , ms top channel 33 kv line top bolt , laying of hdpe pipe pe-80, pn-6, dn-140 mm dia , making of j/kit , stp pole muffing , dismantling of existing 33 kv line and removal of all accessories & fittings from poles, re-rolling of conductor and proper stacking and cartage of dismantled conductor & accessories from site of work to dvvnl, store.