tender for providing/supply and erection of the following decentralised material by contractor with all the accessories to the site. erection should be complete at site with all respect.(as per resspo norms), , natural water lavel earthing (vcb & others) , wti/oti , spring charging motor suitable for 33kv vcb , 11 kv control realy as per the sample provided by the concern engineer , relay as per the sample provided by the concern engineer , control cable 4x2.5sqmm , plinth , fencing , dropper channel , top channel , clamp , t-off channel , danger board with clamp , stay complete , earthing complete , providing, fabrication and fixing of henley type tailless units with frame of size 2.5mx60cmx2.5m made of ms angle 50mmx3mm with fixing of 02 nos. henley type tailless units for double circuit containing 06+06 no. incoming/ outgoing studs of 500 amp/630 volts, made out of copper and rod made of brass along with 01 neutral made of brass & 03 +03 back entry made of brass & having 07 +07 lt porcelain insulator fixed in holding clamp made of m.s strip. both tailless unit should be connected with copper bus bar of size 400mmx50mmx 10 mm (as per site requirement & as per drawing).grouting tailless frame with cement and concrete on the plinth of 160 kva t/f & above with making the connection at t/f and line side with suitable size aluminum crimping lugs 400 sqmm for completing the work all material shall be provided by the contractor. only cable/lead for connection will be provided by the department (with cartage and laying of lt xlpe/pvc cable from esc bijnor/dhampur with loading and unloading to the site by the contractor) (work and items should be as per the respo norms). earthing of m.s. angle frame structure and tailless unit with m.s. earthing rod complete in all respect (earthing rod and grouting of earthing will be provided by contractor). providing & fixing of tin-copper fuses strip/wire of different swg size suitable for tailless unit in all phases in all respect.note:- (above wiil be assumed as one unit) , safe carriage and proper erection/ installation/fabrication/laying/fixing/binding etc. of the following centralised material with all the accessories from esc bijnor/dhampur to the site. erection should be complete at site with all respect.(as per resspo norms) , 11 kv vcb incoming , 11 kv vcb outgoing , 33 kv vcb 1250 a , 33 kv ct 400/200/1-1-1a , 33 kv pt outdoor 33kv/110v , 33 kv control pannel for double t/f , 11 kv bus coupler , 33 kv la , 24 volt battry set , battry charger , 33 kv control pannel for single feeder , 33 kv fuse set , 33 kv line isolator , 33 kv bus isolator , 3x95 sqmm ab cable , acsr weasel conductor , disc insulator with fitting , pin insulator with nut pin , plain cement concrete pole 8.5 mtr long , lt xlpe 1x1000 sqmm cable at desired place as per the instruction of concern engineer. , lt xlpe cable al. 1x240 sq.mm , lt xlpe cable al. 1x400 sq.mm , dismantling of structures/ line and received back of the scrap material from site to esc bijnor/ dhampur with loading & unloading at both ends respectively (as per resspo norms) , 11 kv vcb incoming/outgoing (shabby)/ iran scrap vcb , damage 33 kv vcb , damage 33 kv ct 400/200/1-1-1a , damage 33 kv control pannel for double t/f , battry set , damage 33 kv control pannel for single feeder , relay , 33 kv fuse set , 33 kv line & bus isolator , battery charger 20 volt , damage lt xlpe cable