tender for purchase of lab equipments for ece dept , purchase of lab equipments for ece dept , dc voltmeter (digital) (item code : c006) 1.dcvoltmeteranalog - moving coil -(0-10)v, class1.0(±1%full- scale)accuracy - 5 nos 2.dcvoltmeteranalog- movingcoil-(0-30)v, class1.0(±1%full-scale)accuracy - 4nos , dc ammeter(item code : c007) specifications: •1. dcammeteranalog-movingcoil- (0-30)ma,. 5 nos 2. dcammeteranalog -movingcoil -(0-1000)μa, class 1.0 (±1 % full-scale) accuracy - 5 nos , decade capacitance box(item code : c0011) specifications: • range: 100 providing fixing to 100 μf • rotary switch selection with 6 dials. • maximum voltage: 350 v. • accuracy: ±1%. , decade inductance box(item code : c0012 specifications: • range:10μhto10h. rotaryswitchselectionwith6dials. • low-lossinductors. • accuracy:±1%. , 8051 microcontroller kit(item code : c0013) specifications: •• operating voltage: +5 v dc. • flash memory: 4 kb (at89c51) / 8 kb (at89s52). • ram: 128 bytes internal ram. • 16 × 2 alphanumeric lcd display. • push buttons / tactile switches. • dip switches for digital input. • inbuilt adc interface: ldr, potentiometer. • inbuilt dac interface. • inbuilt stepper motor driver with stepper motor. • inbuilt dc motor driver with dc motor. • 1 × 4 led array, 1 × 4 keypad, 1 × relay. • 1 × buzzer, 16 × 2 lcd display, 1 × pwm driver. • 1 × hardware interrupt key, inbuilt rtc. • inbuilt eeprom and uart module. • 4 × 7-segment display. • supports both assembly and c language programming. • pc interfaceable. , embedded trainer kit (using lpc2148) (item code : c0014) specifications: • cpu - lpc2148, core - 16/32 bit arm7tdmi-s • speed - max 60 mhz, flash - 512kb, ram (on chip) - 40kb, 46 general purpose i/opins, usb2.0 • one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm & watchdog • two uarts (16c550), two i2c (400kb/s), two spi • eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad • one potentiometer for giving analog input, relay & buzzer interface • i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver • lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface • board has inbuilt power supply and mounted in sturdy cabinet accessories • usb cable with utility software to download programs from pc to target board • power cord, user manual , temperature measurement kit (item code : c0019) specifications: • sensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc). • display: 3½ digit led/lcd digital display (typically 200 mv fsd). • temperature source: portable water kettle or heater block. • signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. • test points: multiple 2 mm / 4 mm banana sockets for monitoring input/output signals. • power supply: 230 v ac, 50 hz, single-phase. • accessories: glass thermometer, 10 k ntc thermistor probe, k-type thermocouple probe, patch cords and user manual. , fpga trainer kit(item code : c0025) specifications: • must use industry-standard mid-range fpga device • usb-jtag programmable, compatible with vivado ise (webpack). • power supply: 5 v dc through usb or external adapter. • on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb uart bridge, usb cable. •user manual.