tender for rate contract for supply of handpump set and spare parts , supply of handpump set and spare parts , die set 12mm with handle & bits , hydraulic vice 32 mm. , heavy duty clamp 32 mm , heavy duty clamp 65 mm , connecting rod vice , pipe lifter spanner for 32mm n.b.pipe. , pipe wrench 300 mm , pipe wrench 450 mm , pipe wrench 600 mm , pipe wrench 900 mm , double ended open jaw spanner 17 * 18 in c.v. steel , hacksaw frame , pump bucket (nitrile) for deepwell hand pump(is: 15500 part 7) , sealing ring for deepwell handpumps (is: 15500 part 7) , hex nut with bolt m 12 * 40 , handle axle along with nut & washer for deepwell hand pump (is: 15500 part 4) , single side shielded bearing confiming to is: 15500 part 4 suitable for above handpumps , chain nut with bolt m-12x40 (is: 15500 part 4) , chain with coupling for deep well hand pump , head for deepwell hand pump (is: 15500 part 4) , third plate suitable for deepwell hand pump (is: 15500 part 4) (im-ll) , water tank for deepwell hand pump (is: 15500 part 4) (im-ll) , connecting rod of 12 mm dia. x 3 mtr. length , i.s.i.marked galvanized steel tubes as per i:s 1239 ( part-1) /2004 amdt.1 to 4 scrwed at both ends as per i:s 554/1999 ( reaffirmed 2004) . one end socketed with isi marked socket as per is:1239 ( part -ii)/1992 ( reaffirmed 2003) and other end protected with plastic thread protector medium class , bore size (nominal) diameter - 32 mm , length - 3 meter , cylinder assembly i.m.ii , cylinder body with brass liner for deepwell hand pump (is: 15500 part 5) , reducer cap for deepwell hand pump (is: 15500 part 5) (im-ll) , upper valve along with rubber seat for deepwell hand pump (is: 15500 part 6) (im-ll) , upper valve assly suitable for deep well hand pump (im-ll) (is: 15500 part 6) (im-ll) , lower valve assembly i.m.ii , hacksaw blade (high speed steel) , spacer g.m. i.m.ii , rubber seat lower valve (im-ll) , rubber seat upper valve (im-ll) , front cover , handle for deepwell hand pump (is: 15500 part 4) , stand assembly telescopic for deepwell hand pump , ring spanner 17*18 , crank spanner 17*18 , i.s.i.marked deepwell handpump set (india mark ii) confirming to i.s.15500 completes with head & handle assembly,water tank,telescopic stand assembly,cylinder assembly along with 12 nos. of 12mm x 3 mtr. length ms electrogalvanised connecting rods made of bright bar and 12 nos.of hot dip galvanised riser pipes 32mm n.b. x 3 mtr. long fitted with socket (made from seamless pipe or machined bar & galvanised) at one end and thread protector at another end.charges etc complete