tender for work related to capacity increase of distribution transformers and installation of additional transformers etc. under the business plan (2026-27) scheme in the jurisdiction of electricity distribution subdivision i/ii/iii/iv.- 1 carriage of following material from store center pvvnl to site & vice-versa of work including loading & unloading at both ends maximum distance up to 100 km. :- 2 250 kva t/f 11/0.4 kv 3 11 kv fuse set 4 lt pvc cable al 1x240 sq.mm 5 lt ab conductor 3x95+1x70+1x16 sq.mm 6 laying, lifting of lt ab conductor 3x95+1x70+1x16 sq.mm 7 laying, lifting of lt pvc cable al 1x240 sq.mm 8 fixing of 11 kv fuse set 9 fencing of 250 kva t/f (as per respo schedule) 10 providing and fixing of water level earthing of 250 kva t/f (as per respo schedule) 11 providing and fixing of tailless unit of 250 kva t/f (as per respo schedule) 12 making of plinth 250 kva t/f (as per respo schedule) 13 providing and fixing of danger board barbed wire including jumper 14 providing and fixing of copper l-piece 50x225x10mm (ls) 15 providing and fixing of copper l-piece 62x225x12mm (ls) 16 providing and fixing of al lug long barrel off size (ls) 17 back cartage 100 kva t/f (old and used) site to store centre, meerut 18 carriage of following material from store center pvvnl to site & vice-versa of work including loading & unloading at both ends maximum distance up to 100 km. :- 19 pcc pole 11 mtr. long 20 pcc pole 8.5 mtr long 21 acsr weasal conductor 22 11 kv pin insulator with pin 23 11 kv disc insulator with fitting 24 lt ab cable 3x95 sq.mm 25 250 kva t/f 11/0.4v 26 100 kva t/f 11/0.4v 27 63 kva t/f 11/0.4v 28 11 kv fuse set 29 stay set 30 earthing rod 31 ms angle 65x65x6 sq.mm 32 t-off channel 33 lt xlpe cable 1x240 sq.mm 34 11 kv tpmo 35 abc 3x120+1x95+1x16 sq.mm 36 lt xlpe cable 3.5x150 sq.mm 37 distribution box 3 phase 38 errection pcc pole 11 mtr long/pcc pole 8.5 mtr long after digging a pit of size 1.6 mtr deep in all type of soil including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. (as per uppcl respo). 39 errection of double pcc pole 11 mtr long/pcc pole 8.5 mtr long after digging a pit of size 1.20x0.60x1.6 mtr in all type of soil for each pole including grouting ratio (1:4:8) of the pole with proper ramming after completion of work. (as per uppcl respo). 40 laying, lifting of lt ab cable 3x95. (as per direction of supervising engineer). 41 laying of acsr weasal conductor for jumpering. (as per direction of supervising engineer). 42 fixing of lt xlpe cable 1x240 sq.mm (as per direction of supervising engineer). 43 laying of abc 3x120+1x95+1x16 sq.mm (as per direction of supervising engineer). 44 fixing of lt xlpe cable 3.5x150 sq.mm (as per direction of supervising engineer). 45 fixing of stay rod complete as per norms. (as per direction of supervising engineer). 46 fixing of ms earthing of each 11 kv line and pole after drive of electrodes if size 20mm x 250 mm and connection the earthing point with gi wire. (as per direction of supervising engineer). 47 providing and fixing of ms nut and bolts. (as per direction of supervising engineer). 48 providing and fixing clamp with nut and bolt (as per direction of supervising engineer). 49 making of new 250 kva t/f plinth of size 6x6x3 (feet) 50 new wiremesh fencing of 250 kva t/f. 51 water level earthing of 250 kva t/f 52 mounting of 100/63 kva t/f on double pole 53 providing and fixing of dropper channel. (as per uppcl respo). 54 fixing of 11 kv fuse set. (as per uppcl respo). 55 providing and fixing of fixing of top channel. (as per uppcl respo). 56 providing and fixing of fixing of t-off channel. (as per uppcl respo). 57 providing and fixing of piercing clamp. (as per uppcl respo). 58 providing and fixing of suspension clamp. (as per uppcl respo). 59 providing and fixing of dead and clamp (as per uppcl respo). 60 grouting of pcc pole 11 mtr /pcc pole 8.5 mtr long 61 providing and fixing of stone pad (as per uppcl respo). 62 providing and fixing of tailless unit (as per uppcl respo). 63 providing and fixing of danger board (as per uppcl respo). 64 providing and fixing of copper l-piece 50x225x10mm (ls) 65 providing and fixing of copper l-piece 62x225x12mm (ls) 66 grouting of stay set (as per direction of supervising engineer). 67 providing and fixing of ms angle 65x65x6 sq.mm (as per uppcl respo). 68 fixing of 11 kv pin insulator with pin (as per uppcl respo). 69 fixing of 11 kv disc insulator with fitting (as per uppcl respo).