tender for transformer increasing work under edd chandausi and sambhal= 1 for edd chandausi and sambhal 2 safe carriage of the following centralised material from store centre to site /je store with loading & unloading at both ends respectively. 3 11 kv fuse set 4 11 kv pin insulator (polymeric) 5 11 kv pin with nut(polymeric) 6 11 kv tpmo 7 11/0.4 kv t/f 63 kva 8 11/0.4 kv t/f 100 kva 9 11/0.4 kv t/f 250 kva 10 abc cable 3*120+1*95+1*16mm sq. (5% sag+ 1 %connection) 11 acsr wesal insulated conductor 11 kv 12 earthing of pole by ms earthing rod of 20x2500mm & 6 swg earthing wire etc 13 lt xlpe cable al 1x400 sq mm 14 pcc poles 8.5 mtr. long 15 stay set complete 16x1800 16 stay wire 7/8 swg 17 proper installation/fabrication/laying/fixing/binding etc. of the following material with all the accessories (as per resspo norms) 18 11 kv fuse set 19 11 kv pin insulator (polymeric) 20 11 kv pin with nut(polymeric) 21 11 kv tpmo 22 11/0.4 kv t/f 63 kva 23 11/0.4 kv t/f 100 kva 24 11/0.4 kv t/f 250 kva 25 abc cable 3*120+1*95+1*16mm sq. (5% sag+ 1 %connection) 26 acsr wesal insulated conductor 11 kv 27 earthing of pole by ms earthing rod of 20x2500mm & 6 swg earthing wire etc 28 lt xlpe cable al 1x400 sq mm 29 pcc poles 8.5 mtr. long 30 stay set complete 16x1800 31 stay wire 7/8 swg 32 provinding and installation/fixing of the following decentralised material with all the accessories (as per resspo norms) 33 abc suspension clamps with i-hook 34 al leg long barrel off size (ls) 35 concreting of stay 36 copper l-piece 62x225x12 mm (ls) 37 cost of earthing for g.i. pipe bore earthing 100 feet deep clamp dia 40 mm including accessories & fitting for t/f one no neutral one no body. as per standard 38 dead end clamp with i-hook 39 fancing 40 henley type tailless unit protection cubical panel 500 a, 650 v for 250 kva dt 41 providing & installation aluminum crimping lug 50 sqmm 42 providing & installation pg clamp weasel to weasel. 43 providing and fixing of lt lead 12 sqmm 44 providing & installation of lt fuse strip 400 kva t/f 3mm 45 piercing clamp 46 plinth for size 2x2x1.5m 47 providing and fixing earting of 100 kva tf 48 dismantling and received back of the scrap material from site to esc chandausi with loading & unloading at both ends respectively (as per resspo norms)