tender for work regarding the rates for bitumen bag items in various wards within the limits of the mathura-vrindavan municipal corporation.-1 demolishing cement concrete manually including disposal of material withing 50 metres lead (ch.17 page no.50 si.no.1 dsr specification no.15.2,15.2.1 pwd sor 2023-24) 2 demolishing r.c.c. work manually by mechanical means including stacking of steel bars and disposal of unserviceable matrial within 50 metres lead as per direction of engineer in charge. (ch.17 page no.50 si.no.2 dsr specification no. 15.3 pwd sor 2023-24) 3 demolishing brick work manually by mechanical means including stacking of steel bars and disposal of unserviceable matrial within 50 metres lead as per direction of engineer in charge. (ch.17 page no.50 si.no.6 dsr specification no.15.7.4 pwd sor 2023-24) 4 dismantlling interlocking tiles tiles work in floors/roads lald in dry sand including stacking with 50 metre lead for thickness of tile 60mm to 80mm (ch.17 page no.51 si.no.22 pwd sor 2023-24) 5 e/w in excavation in foundation in ordinary soil (loam, clay or sand) including lift up to 1.50 mtr and lead up to 30 mtr and including filling watering and ramming of excavated earth in to the trenches or in to the space b/w the building and the side of foundation trenches or in to the and removal and disposal of surplus earth as directed by the engineer incharge up to a distance of 30 mtr from the foundation trenches. (ch. no. 4, page no. 17 si no. 1, 251, pwd sor 2023-24) 6 e/w in filling or in cutting in ordinary soil with 8 km cartage including supply of all materials, labour and t & p etc. required for propper completion of the work. (rate analysis) 7 sand filling in plinth including supply of necessary quantity of local sand from a distance not exceeding 8 kms from the site of work and including watering dressing etc. required for proper completion of work. (ch. no. 4, page no. 17 si no. 6 pwd sor 2023-24) 8 cleaning jungles including uprooting of trunk vegetation grass, bushes, wood trees and sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of area cleared. (ch. no. 4, page no. 17 si no. 7 pwd sor 2023-24) 9 p/l c.c. in 1:5:10 (1 cement: 5 corse sand: 10 graded stone aggregated 40 mm nominal size) and curing complete, including cost of form work. in foundation and floors. (ch. no. 5, page no. 18 si no. 1 (4.1) 4.1.10, pwd sor 2023-24) 10 providing and laying spreading & compacting of granular sub-base (gsb) by providing coarse graded (gr-1) materials form approved quarry. spreading etc including all complete.as directed by engineer incharge. (rate analysis) 11 class m-150 (non modular) b/w in 1:4 cement and fine sand motar in foundation and plinth including supply of all materials, labour and t & p etc. required for propper completion of the work. (ch. no. 6, page no. 20 si no. 3, 6.1, 6.1.1 a, pwd sor 2023-24) 12 class m-150 (non modular) b/w in 1:4 cement and fine sand motar in super structure above plinth level upto floor five level including supply of all materials, labour and t & p etc. required for propper completion of the work. (ch. no. 6, page no. 20 si no. (3+5), (6.1.1 a+6.8 a), pwd sor 2023-24) 13 6mm celling plaster 1:3 (1 cement: 3 fine sand) cement & fine sand in f.lvl. not less than 1.25, 1:3 including chiping of rcc surface before ceiling plaster. the cost of including all material, labour t&p and scafolding etc. (ch. no. 13, page no. 42 si no. 13, pwd sor 2023-24) 14 12 mm cement plaster with cement motar in proportion of 1:4 cement & fine sand (not less than in 1.25 fm) of single coat for interior plastering up to floor to level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. in girth and finished even and smooth. (ch. no. 13, page no. 41 si no. 3, 13.1, 13.1.1, pwd sor 2023-24) 15 p/l c.c. in 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregrate 20 mm nominal size) and curing complete, including cost of formwork in foundation and floor. (ch. no. 5, page no. 18 si no. 6 (4.1), 4.1.3, pwd sor 2023-24) 16 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying and including the cost of centering, shuttering, finishing but excluding reinforcement, including admixtures in recommended proporlions as per 15: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-incharge. (note: cement content considered in this item is @330 kg/cum. excess/less cement used as per design mix is payable recoverable separately). allwork up to plinth level. (ch. no. 5, page no. 19 si no. 16 pwd sor 2023-24) 17 18 all works above plinth level upto floor v level. reinforced cement concrete work providing and laying in position. spacified grade of reinforcement cement concrete, slab including the cost centering, shuttering, finishing and excluding reinforcement- all work upto plinth level: 1:1.5:3 (1 cement: 1.5 corse sand: 3 stone grits with 20 mm nominal size) (ch. no. 5, page no. 18 si no. 9, 5.1, 5.1.2, pwd sor 2023-24) 19 rcc work providing and laying in position specified grade of reinforced cement concrete, slab including the cost of centering, shutterang, finishing and excluding reinforcement above plinth level upto fifth floor lable 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone. (ch. no. 5, page no. 19 si no. 10, pwd sor 2023-24) 20 steel reinforcement of r.c.c work including straightening, cutting, bending, placing in position and binding all complete. (rate analysis) 21 supply & laying of i shped (zigzag) precast interlocking tiles of thickness 60 to 100 mm (compressive strength not less then 30 mpa and weight 4.5kg) including 25mm thick local sand base leveling and dressing of surfase to required level and slope filling joints with local sand all complete work. (ch. no. 20, page no. 56 si no. 17, pwd sor 2023-24) 60 mm (rubber molded grey) mistri/mason first class welder beldar/chaukidar mazdoor/coolie two donkey with driver tractor trolly with driver including p.o.l tractor with water tanker with driver including fuel and cost of water j.c.b machine with driver including p.o.l class m-150 brick ballast 40mm gauge fly ash brick (specification/strength should not be less than bricks - m-50) 230mmx110mmx75mm grey 80 mm thick rubber mould grey 80 mm thick coloured rubber moulded 80 mm thick rubber mould grey 100 mm thick coloured rubber moulded 100 mm thick size 12x12x6 rubber moulded cement concrete kerb stone m-20 size 12x 18 x6 rubber moulded cement concrete kerb stone м-20 for agra & mathura district coarse sand (excluding actual bulkage) local sand coarse sand (excluding actual bulkage) portland cement (j.p., a.c.c., birla, j.k.) о.р.с. white cement (j.k. or birla brand) ms angle, channel, tee, sheet, pipe, flay, rs. joints etc. cost of earth 5mm thick plain glass (best quality, cut to size) 4mm thick plain glass (best quality, cut to size) 25mm wide 4mm thick glass strips 40mm wide, 4mm thick glass strips from maihyer lime 300mm x 450mm size white glazed tiles (1t quality 1.5.1. marked or equivalent) thickness 6mm 300mm x 450mm size coloured glazed tiles (1t quality 1.s.i. marked or equivalent) thickness 6mm. marble white alebeta 18mm thick, (60cm x 60cm size) marble white dhungri 18mm thick, (60cm x 60cm size) marble white adanga 18mm thick, (60cm x 60cm size) black granite (polished) in big slab 18mm thick kotastone of asi (k) 16 to 24mm thick kota stone of asi (k) 25 to 40mm thick. baroda green 20mm thick, (60cm x 60cm size) for floor size 300 x 300mm- white bell/kajaria tiles/romano somany, orient, asian tiles/ jhonson (white cloudy ordinary colours) for wall-size 200 x 300mm coloured bell/kajaria tiles/romano somany, orient, asian tiles/ jhonson (white cloudy ordinary colours) vitrified tiles 600 x 600mm 10mm thick bell/kajaria tiles/romano somany, orient, asian tiles/ jhonson (white cloudy ordinary colours) for floor size 300 x 300mm- white (anti skid tiles) bell/kajaria tiles/romano somany, orient, asian tiles/ jhonson (white cloudy ordinary colours) vitrified tiles 600 x 600mm (anti skid tiles) 10mm thick bell/kajaria tiles/romano somany, orient, asian tiles/jhonson (white cloudy ordinary colours) (1) 10mm dia 80mm long 1.5.1. marked aluminum tower bolt (with fixers) (11) 10mm dia 100mm long i.s.1. marked aluminum tower bolt (with fixers) (iii) 10mm dia 150mm long i.s.i. marked aluminum tower bolt (with fixers) (iv) 10mm dia 200mm long i.s.i. marked aluminum tower bolt (with fixers) (v) 10mm dia 300mm long 1.5.1. marked aluminum tower bolt (with etc