tender for material supply of anganavadi construction(retender) , stone aggregate(single size):40mm nominal size , stone aggregate(single size):20 mm nominal size , coarse sand(zone |||) , portland cement , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator(needle type 40 mm) , stone for masonry work , structural steel such as tees,angles,channels and r.s.joists , red oxide zinc chromite primer , adjustable telescopic prop 3m (2.02-3.75m) , beam clamp 300-380mm(450-1070mm) , wall form panel 1250*500mm , coner angle 45*45*5mm 1.50m long , 100mm channel shoulder 2.5m long , double clip , single clip , m.s tube 40mm dia , adjustable span eso+si(2.35-3.40) , stone aggregate (single size): 10 mm nominal size , twisted steel , solid blocks of size 30*20*20cm , solid blocks of size 40*20*10cm , solid blocks of size 30*20*15cm , anjili wood scantls , mild steel round bar above 12mm dia , flats up to 10 mm in thickness , fine sand (zone iv) , vitrified floor tile (60*60) , ceramic glazed tiles 1st quality 300*300 mm in all shades designs except white,lvory,fume red brown , ceramic glazed tiles 1st quality minimum thickness 5mm in all colours shades and designs except burgundy,bottle green , anjily wood in planks , bright finished or black enameled mild steel butt hinges 100*58*1.90 mm , bright finished or black enameled mild steel butt hinges 50*37*1.50 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , anjili wood planks , float glass sheet of nominal thickness 4 mm ( weight not less than 10 kg/sqm) , factory made door frame size 50*47 mm with wall thickness 5mm made of single piece extruded profile , 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished , powder coated m s butt hinges 100mm*58mm*1.9mm , water thinnable cement primer for interior wall surface, having voc content less than 50gms/litre , plastic