tender for m&l for repairs to potholes any depth , not exc 1 sqm each including sweeping free from dust and mud or water,scoring sunken sufaces in roads ,paths, etc, cutting around edges to at least 25 mm in depth,making good by applying tack coat at 5 kg per 10 sqm putting in premixed bituminious macadam well rammed and sealed with binder 9.8kg per 10 sqm binded with 0.09cum of stone chipping, 6.3mm size and again well rammed (incl supply of premixed macadam, binder and chippings), depth of potholes exc 30cm completed all as specified and as directed by engr-in-charge. , m&l for scarifying or picking gravelled, macadam or bituminous macadam surfaces exc 50 and n.exc 100mm deep in area not exc 400 sqm complete all as specified and as directed. , m&l for rolling and consolidating formation surfaces in cutting by exc 8 tonne and n.exc 12 tonne power roller complete all as specified and as directed by engr-in-charge. , m&l for 7.5cm thick (compacted thickness) wbm, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required type of aggregate granite, trap or basalt completed all as specified and as directed by engr-in-charge. , m&l for preparing surfaces of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed by engr-in-charge. , m&l for applying evenly a priming /tack coat with bituminious primer at 10 kg per 10 sqm paving bitumen vg-10 on new surface (wbm & bm) complete all as specified and as directed by engr-in-charge. , m&l for paving bitumen any penetration premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less)complete all as specified and as directed by engr-in-charge. , m&l for preparing to black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed by engr-in-charge. , m&l using paving bitumen for applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre of vg -10 complete all as specified and as directed by engr-in-charge. , m&l for paving bitumen any penetration bituminous premix asphaltic dense concrete 40mm consolidated thickness with 6% binder content by weightof total mix, rolled and compacted to required camber and gradient complete complete all as specified and as directed by engr-in-charge. , m&l for preparing bituminnous surfaces of road and marking 2.5mm thick centre line, stop lines, dashes, arrows etc and the like not exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour conforming to bs 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and as directed by engr-in-charge. , supply and fix solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/0.3 watt one ni-ed rechargeable battery (1.2v/1600ma) consisting of super bright led with 10,000 to 18,000 mcd complete as per manufactures instructions etc all as specified and as directed. , s&f cat eye solar reflective type of metal body alloy of size 100mmx100mm x 20mm with pama striplens reflector of modal no da 972.0 fixed with and incl ms stud of suitable size as per manufactures instruction completed all as specified and as directed. , s&f metal tubular dealineator made out of abs round body fitted with 2 nos 65mm dia highly reflective reflector made out of pmma and mounted on 45/50 mm dia mild steel pipe of 600mm hight duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in plain cement concrete 1:2:4 (150x150x300mm) type b1 complete all as specified and as directed. , s&f polycarbonate convex mirror (80cm dia) make 3m or equivalent in automat/ace/dark eye/isi marked, polycarbonate body mounted on 16 gauge ms pipe of 75mm outer dia fixed 1.5 mtr above ground surfaces abd 60cm below ground incl plain cement concrete foundation of size 30x30x60cm with plain cement concrete 1:3:6 type c1bottom part of ms pipe welded with 5mm thick 125mm5125mm ms pipe for anchorage in pcc, ms pipe shal be painted stove enamelled paint over a coat of red oxide, incl necessary eathwork excavation in any soil, removed and disposal of spoil complete all as specified and as directed by engr-in-charge (note :- convex mirror shall be as per sample)