tender for rate contract/ purchase of cane carrier shaft with sprockets, rbc and surplus bagasse carrier drive and non drive pulley, mrc shaft with sprockets, irc shaft with sprocket, , bagasse elevator and main bagasse carrier shaft with sprockets. , cane carrier drive shaft with 03 nos sprockets length of shaft- 4200mm shaft size: ø 280 at center & ø 220 at bearings material of shaft: 40c8, is 1570 sprocket teeth-16 nos sprocket pitch- 200mm sprocket hub thickness- 200mm sprocket thickness near teeth- 35mm sprocket material- c.s, is:2708, gr ll drawing should be draw by bidder before supply from actual shaft installed in factory. , rake carrier drive shaft with 02 nos sprockets length of shaft- 4000mm shaft size: ø 280 at center & ø 220 at bearings material of shaft: 45c8, is 1570 sprocket teeth-16 nos sprocket pitch- 229mm sprocket hub thickness- 220mm sprocket thickness near teeth- 85mm sprocket material- c.s, is:2708, gr ll drawing should be draw by bidder before supply from actual shaft installed in factory. , inter rake carrier drive shaft with 02 nos sprockets length of shaft- 3960mm shaft size: ø 225 at center & ø 160 at bearings material of shaft: 40c8, is 1570 sprocket teeth-16 nos sprocket pitch- 229mm sprocket hub thickness- 220mm sprocket thickness near teeth- 85mm sprocket material- c.s, is:2708, gr ll drawing should be draw by bidder before supply from actual shaft installed in factory. , rbc conveyor drive head pulley with through out shaft shaft length-3500mm shell size- ø 630 x 2600mm face width- 12mm thick shell material- is 2062, grade a, shaft material- en-8 rolled and welded, m.s construction with keyed shaft. 12mm thk rubber lagging with diamond groove shaft size: ø 140 at center & ø 125 at bearings , rbc conveyor tail end pulley with through out shaft shaft length-3200mm shell size- ø 500 x 2600mm face width- 10mm thick shell material- is 2062, grade a, shaft material- en-8 rolled and welded, m.s construction with keyed shaft. 10mm thk rubber lagging with diamond groove shaft size: ø 120 at center & ø 110 at bearings , surplus bagasse conveyor tail end pulley with through out shaft shaft length-3200mm shell size- ø 500 x 2600mm face width- 10mm thick shell material- is 2062, grade a, shaft material- en-8 rolled and welded, m.s construction with keyed shaft. 10mm thk rubber lagging with diamond groove shaft size: ø 120 at center & ø 110 at bearings , belt conveyor bc-01 drive pulley with through out shaft shaft length-2700mm shell size- ø 510 x 2000mm face width- 10mm thick shell material- is 2062, grade a, shaft material- en-8 rolled and welded, m.s construction with keyed shaft. 15mm thk rubber lagging with diamond groove shaft size: ø 140 at center & ø 120 at bearings , bagasse elevator drive shaft with 02 nos sprockets length of shaft- 3800mm shaft size: ø 190 at center material of shaft: 40c8, is 1570 sprocket teeth-16 nos sprocket pitch- 200mm sprocket hub thickness- 290mm sprocket thickness near teeth- 35mm sprocket material- c.s, is:2708, gr ll drawing should be draw by bidder before supply from actual shaft installed in factory. , main bagasse carrier drive shaft with 02 nos sprockets length of shaft- 3800mm shaft size: ø 190 at center material of shaft: 40c8, is 1570 sprocket teeth-16 nos sprocket pitch- 200mm sprocket hub thickness- 290mm sprocket thickness near teeth- 35mm sprocket material- c.s, is:2708, gr ll drawing should be draw by bidder before supply from actual shaft installed in factory