bids are invited for construction of morcha, pathway, repairing and painting of existing structure at jharia magazine -1 surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift upto 1.5m: all kinds of soil 310.00 sqm 2 earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge. all kinds of soil 40.00 cum 3 return earth filling by available excavated earth (excluding rock) or locally available sand in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming(allow for breading up lumps, shrinkage etc.) watering lead upto 50 metre and lift up to 1.5 m complete as directed by the engineer-in-charge 15.00 cum 4 supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. 5 providing and laying plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size )in foundation, plinth wherever necessary including desalinating, finishing, curing etc. as per specification all complete but centring and shuttering etc. 55.00 cum 6 providing and laying reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate using 20 mm down screened and washed) including machine mixing, placing in position and mechanically vibrating in footing, column, plinth beam up to plinth level and like including preparing of the top surface finishing curing ecomplete in all respects as per specification and direction. 16.00 cum 7 providing and laying reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate using 20 mm down screened and washed) including machine mixing, placing in position and mechanically vibrating in beams, suspended floor landing, balconies, lintel etc.to any floor and any where and like including preparing of the top surface finishing curing complete in all respects as per specification and direction. 8 hire and labour charges for providing and fixing straight shuttering for concrete works to anywhere at any floor (including staging) including strutting, propping etc. and removal of form or striking out after completion of works as directed and specified by the engineer-in-charge. a) foundations, footings, bases of columns plinth beam etc 25.00 sqm 9 b) suspended floors, roofs, landings, balconies, shelves etc. 30.00 sqm 10 c) lintels, beams, cantilever etc. 35.00 sqm 11 steel reinforcement (for reinforced cement concrete work) including transporting, decoiling, straightening, derusting, placing, cutting to requisite length, hooking, bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loose rust and applying a coat of cement wash if necessary complete in all respects as per drawing and at any floor as directed. 3500.00 kg 12 brick work with bricks of class designation 75 in superstructure with cement mortar 1:6 (1 cement : 6 course sand) including all materials, labour, scaffolding, racking out joints, curing as per specification and direction of the engineer-incharge. 25.00 cum 13 12 mm cement plaster of mix : 1: 4 (1 cement : 4 coarse sand ) 250.00 sqm 14 neat cement punning 125.00 sqm 15 removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2800.00 sqm 16 finishing walls with water proofing cement paint of required shade : old work (one or more coats @ 2.20 kg/10 sqm) complete. 2950.00 sqm 17 with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 20.00 sqm 18 supplying and painting with synthetic enamel paint/ aluminum paint of approved brand and manufacture two or more coats in new work..two or more coats in new work. 200.00 sqm 19 applying priming coats with primer of approved brand and manufacture, having low voc (volatile organic compound ) content. with water thinnable cement primer on wall surface having voc content less than 50 grams/litre 140.00 sqm 20 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws total quantity : 12398