tender for preparing the existing surface to laying the road to proper gradient and remove the loose soil without damage the water supply and other pipe lines. the rate inclusive of all charges such as earth work and remove the same away from the site etc, complete as per standard specifications. , providing and laying, spreading and compacting graded stone aggregate to wet mix macadam (wmm) specification including premixing the material with water at omc in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of morth specifications. , providing and laying prime coat of 7 kgs/10 sqm over the wmm surface treated with primer using 7 kgs of bituminous emulsion (ss) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as prime coat manually etc., complete as per 502 of morth rev-5 specifications , providing and laying tack coat of 2.5 kgs/10 sqm over the wmm surface treated with binder using 2.5 kgs of bituminous emulsion (rs) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of morth rev-5 specifications , providing and laying 50 mm compacted thick dense bituminous macadam using 0.24 cum of 26.5-13.2 mm graded metal and 0.25 cum of 13.2-2.36 mm graded metal and 0.23 cum of 2.36 mm & below metal with 53.20 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to c m p site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant 20- 30 tonnes capacity conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for unifo