tender for item rate boq boq_ver3.0 item rate normal inr only inr select, excess (+), less (-) less (-) tender inviting authority: executive engineer jpdcl electric div-i, parade, jammu. supply, dismantling, erection, testing & commissioning for shifting of 11kv line and shifting of 02nos. 100kva distribution sub-stations along the boundary of jkca hostel ground jammu under the jurisdiction of electric division div.-i (jpdcl) jammu on turnkey basis. contract no:ed-i/e-nit/16 of 2026-27 dated 24.04.2026 bidder name : price schedule (this boq template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. bidders are allowed to enter the bidder name and values only ) number # text # text # number # text # number number text text # number # text# text # number # number number number number text text number number number number text text number number number number text text number number number number text text number number number number text text number number number # number # text text number # number # date number # number # text # , item description , supply, erection, testing & commissioning for shifting of ht line on 9 mtr long st poles using 120mm² xlpe cable , st poles 9 mtr long (st-410 sp 15) , 120 mm² xlpe (ht) cable , acsr rabbit conductor , 11 kv pin insulator with fitting , heat shrinkable outdoor cable termination kit , suspension/tension clamp with eye hook , galvanized nuts and bolts. , danger plates , anti-climbing device with clamps , earthing complete by gi pipe 40mm or gi rod 20mm 2.5mtr long through gi strip , cement bottoming 1:2:4 mix as per rec standards 0.5cum/pole , red-oxide , aluminium paint , galvanized stay set with 50x8mm stay clamp, guy insulator(2nos.), anchor plate (200 x 200 x 6 mm), nut-bolts, 2nos turn-buckles, 1.8m long, 16 mm diameter solid gs stay rod & 7/3.15 mm dia gi stranded wire complete , channel/angle/flat iron , guy wire , supply, erection, testing & commissioning for shifting of 02nos. 100 kva distribution sub-stations , 11/0.433 kv, 3 phase 100 kva distribution transformer with bi-metallic terminal connectors (energy level-2) aluminium wound and with lv cable box having detachable aluminium gland plate. (transformers available at site) , gapless surge arrester, 9 kv, 10 ka, la with polymer housing station type , 11 kv go, ab switch 3 phase, 3 pole, 200 amp, vertical type , 11 kv horn gap fuse set 3 phase, 200 annual periodical maintenance , 185 mm² cable, 1.1 kv grade, pvc insulated stranded conductor frls type. , st poles 9mtr long (st -410 sp 33) , 11 kv polymeric composite disc insulators 12kv, min following load 45 kn, lightening impulse 75kv positive and 80kv negative, creepage distance 320mm with fittings , gi channel/angle/flat of sizes including clamps , galvanized nuts & bolts , earthing of sub-station -excavation of earth pit of diameter 650mm and depth 3000mm, installation of earthing pipe of 40mm nominal bore and 4mm wall thickness and length 2.5m long as per is 1239 gi strip for neutral earthing of size 25mm into 3mm for connection of transformer body, go set and lightening arrestor as per is 2629/85, gi nuts & bolts, refilled with earth enhancement material , 11 kv polymeric composite pin insulators 12kv, 5kn,lighting impulse 75kv positive and 80kv negative, creepage distance 320mm , lt distribution box , galvanized stay set with 50x8mm stay clamp, guy insulator (2 nos), anchor plate (200x200x6mm) nuts & bolts, 2 nos. turn buckles,1.8mm long, 16mm diameter solid gs stay rod and 7/3.15mm dia gi standard wire complete , wedge connectors/ pg clamps , danger plates with clamps , gi barbed wire for anti climbing , cement bottoming 1:2:4 mix as per rec standards 0.5cum/pole , painting of poles red-oxide , painting of poles aluminium paint , sundry items like aluminium lugs, jumpers, binding tape aluminium thimbles etc. total in figures 0.0 0.0 inr zero only quoted rate in figures select 0.0 0.0 zero only quoted rate in words inr zero only