tender for fabrication and erection job--replacement of 50% lower portion of the juice well tank located in the mill house with the help of ms plate and welding along with completion of all connections and transportation of worn out material to the scrap yard of the mill. replacing the juice tray below the trpf roller, dismantling the weak/corroded juice tray, manufacturing a new juice tray using 5/6/8 mm ms plate and angles of size 30x30x6 mm. replacement of bath maceration boots with side juice box of rack elevator installed in mill house. demantling bath maceration boots with weak/soaked sides juice box status quo bo according to the specifications, new 12 mm, ms plates should be constructed and a satisfactory water trial should be given. welding will be done as per requirement. replacing the weak/corroded hollow drum of ruck carrier pin drive. dismantling the weak/corroded drums. manufacturing and installing new drums as per the existing condition using 8/10 mm, ms plate. repairing a weak/worn pusher roller manufacture of bagasse blower casing and fitting as per requirement. replacing weak/corroded casing of dsm screen. dismantling of weak/corroded casing. manufacturing and installation of new casing using 8/6 mm, ms plate. replacement of juice sum conveyor scrolls, dismantling of weakened/corroded scrolls, manufacturing of new scrolls from 6 mm, ms plate with 8 inch dia piece as per the status and giving satisfactory trial (approximately 16 nos.) removal of old corroded tube of screw conveyor installed in the mill and making new tube in its place from 8/12/25 mm ms plate, fitting of screw conveyor and giving successful trial. manufacture of new juice suck conveyor for the mill - manufacture of new trough using 8/12/25 mm ms plate and manufacture of scroll using 6 mm ms plate and 8 inch dia ms pipe as per status and give satisfactory trial. manufacturing and installation of trpf gear guard using 3/5 mm ms plate. manufacture of trpf roller guard using 5/6 mm ms plate as per the situation. forging holes of elliptical side links of cane carrier/auxiliary cane carrier/rake elevator/bagasse carrier. replacing the weak/corroded juice box of dsm screen at the mill. dismantling the weak/corroded juice box. manufacturing and installing a new juice box using 8/10 mm ms plate. manufacturing and fitting of juice gutters for dsm screen juice boxes using 5/6 mm ms plate