tender for procurement of m/s hydrocraft make hydraulic fittings for wagon tippler, side arm charger, paddle feeder, apron feeder and stacker reclaimer installed at chp, ph-i, 2x600mw and chp-ii, sstpp, mppgcl, dongalia . (as per tender schedule) , paddle feeder for chp-ii (part-i) , straight coupling 60.3 o/d he-sc-60-s , sae flange 3/4 6000 psi he-af5-402st , straight coupling 18 o/d he-sc-18-l , seamless pipe 42 x 3 he-pipe-42 , pipe clamp 60.3 o/d pc-60-h , apron feeder for chp-ii (part-i) , sae flange 1 1/2 6000 psi he-afs-405 st , reducer 2/1 br-2-1 , sae flange 1-6000 psi he-afs-255 st , elbow 2(60.3) lr-90-60.3 , male stud 28 l he-msc-28-l , male stud 18 h he-msc-18-h , elbow 3/4 lr-90-28 , pipe clamp 2 heavy series pc-60-h , pipe clamp 3/4 heavy series pc-28-h , split flange 1 1/2-6000 psi he-hf-6005 , side arm charger for chp-ii (part-i) , 1/2 bsp male stud coupling w8cpnbr he-sac-001-st , straight coupling w4cnb he-sac-002-sc , reducer to suit pipe 21.3 od x 2 thk. to straight coupling w4cnb he-sac-003-rd , male stud coupling 4cpnbr he-sac-006-msc , cold drawn seamless steel tube 20 od. x 2 thk he-sac-008-st , straight coupling 4cnb he-sac-009-sc , sae flange afsa 51-6 , 2 6000 psi he-sac-014-sae , reducer to suit with equal tee union w8tnb & straight coupling 4cnb he-sac-015-rd , seamless steel tube 38 od. he-sac-016-st , long radius 90° elbow to suit with tube 73x 8 thk he-sac-017-lre , long radius 90° equal elbow to suit with tube 38 x 5 thk. he-sac-018-lre , reducer to suit tube od 73x8 thk. to tube od 38x5 thk he-sac-019-rst , reducer to suit tube od 38x5 thk to sae flange 1 he-sac-020-rst , 1 male stud coupling w cp25-sr he-sac-022-sc , cold drawn seamless steel tube ø25x2 thk he-sac-024-cst , 1 1/4 male stud coupling wcp 38-s/r 1 1/4 he-sac-027-sc , reducer to suit with straight coupling wc 25-s he-sac-032-sc , straight coupling wc15-l he-sac-037-sc , reducer to suit male stud coupling w12 cpnbr/pipe 26.9 od x 3.6 thk. . he-sac-047-sc-r , male/female reducing adapter ri 1/2(m) x 1/4(f) he-sac-051-ra , reducer to suit male stud coupling w12cpnbr he-sac-053-sm-r , straight coupling w 20cnb he-sac-055-sc , sae flange 2 1/2 3000 psi afsa 64-3 he-sac-059-sae-f , stacker reclaimerfor chp-ii (part-i) , male stud coupling w cp25-s/r 1/2 , with bonded seal he-st-03 , 1 hp ball valve he-st-04 , hose 1 sae 100r2 with swivel nut m36x2 & o ring at both ends ,length 1500 mm he-st-05 , male stud coupling cp10-l/r , with bonded seal (hyd air type) he-st-06 , 1/4 hp ball valve he-st-07 , hose 1/4 sae 100r2 with swivel nut m16 & o ring at both ends,length 1500 mm he-st-08 , sae flange 1 6000 psi , avit type afs 25-6 butt weld type to suit 25 od x 2.5 thk. pipe without o ring & 4 nos. m12 x 40 mounting hole. he-st-09 , hose 1/2 sae 100r2 with swivel nut m24 & o ring at both ends,length 1000 mm.(both end straight) he-st-13 , straight coupling w c12-l (hyd air type) he-st-21 , pipe clamp for 25 od tube pch 1.25 (hyd. air) he-st-22 , pipe clamp for 12 od tube pch 1.12 (hyd. air) he-st-23 , wagon tippler for chp-ii (part-i) , straight coupling ) for 38 od tube with one side swivel nut and weld nipple removed he-wt-wc38-s , long radious 90 deg equal elbow to suit with tube 38 x 3.2 forgedfitting as per asme b16.9-1993 (butt weld type, 6000 psi) he-wt-24 , equal tee union for 38 od tube with weld nipple and o ring (hyd air part no wt38-s, heavy series) he-wt-26 , 1/2 bsp male stud coupling wc15-lr with bonded seal (hyd air type) with weld nipple & o ring he-wt-31 , reducer to suit with tube 73 x 5. to 22 x 2 . (butt weld type, 3000 psi)forged fitting as perasme b16.9-1993 he-wt-40 , long radious 90 deg equal elbow to suit with tube 73 x 5 thk. forgedfitting as per asme b16.9-1993 (butt weld type, 6000 psi) he-wt-44 , medium pressure ball valve to suit with 73 od x 5 thk. pipe & rated pressure 3000 psi, valve should be supplyed with suitable fittings/flanges to be matched with 73 od x 5thk. pipe he-wt-47 , long radius 90° elbow to suit with tube 73 x 5 weld type) forged fitting as per asme b16-9-1993(butt weld type 3000 psi) he-wt-49 , long radius 90° elbow to suit with tube 60.3od x5.6 . he-wt-53 , equal tee union for 60.3 mm od tube forge fittings as perasme b16,9-1993,6000 psi he-wt-54 , cold drawn seamless steel tube 22 x 2.2 ., as per din en10305-1:2002 he-wt-56 , sae flange 2,3000 psi butt weld type with 0 ring & 4 nos. fasteners m12 x 45 long with spring washer he-wt-e-17_l , equal tee t suit with tube 60.3 x 4.5 ,3000 psi,butt weld type fitting. he-wt-e-25_l , long radius 90° elbow for tube 60.3 od ,3000 psi,butt weld type fitting. he-wt-e-27_l , reducer to suit 60.3 od x 4.5 to 20 od x 2.3 3000 psi butt weld type fitting. he-wt-e-28_l , cold drawn seanless steel tube 20 x 2.3 thk. as per din en10220-1:2002 he-wt-e-30_l , straight coupling for 12 od tube he-wt-e-c12-l , reducer to suit with tube 12 od x 1.6 with 35od x 2 he-wt-e-45_l , equal tee union for 35 od tube hyd. air part no he-wt-35-l , equal elbow union hyd. air part no wt35 l with oil nipple & o- ring he-wt-e-05_l , high pressure ball valve to suit with 38 od x 3.2 . pipe & rated pressure6000 psi. valve should be supplyed with suitable fittings/flanges to be matched with 38 od x 3.2 pipe he-wt-e-05_l , high pressure ball valve to suit with-out 38 od x 3.2 . pipe & rated pressure 6000 psi. valve should be supplyed with suitable fittings/flanges to be matched with 38 od x 3.2 .pipe he-wt-e-05_l , low pressure ball valve to suit with 38 od x 2.6 thk. pipe & rated pressure 3000 psi. valve should be supplyed with suitable fittings/flanges to be matched with 38 od x 2.6 thk.pipe , pipe clamp for 38 od. tube p.c.h 1.38 , pipe clamp for 35 od. tube p.c.h 1.35 , pipe clamp for 33.7 od tube p.c.h 1.33 , pipe clamp for 22 od. tube p.c.h 1.22 , tube-cs (part-a material for wagon tippler chp-i) , 12 o/d x 1.5 thk as per din 2391 pipe 12/1.5 , 18 o/d x 2 thk as per din 2391 pipe 18/2 , 20 o/d x 2.5 thk as per din 2391 pipe 20/2.5 , 22 o/d x 2 thk as per din 2391 pipe 22/2 , 30 o/d x 4 thk as per din 2391 pipe 30/4 , 28 o/d x 2.5 thk as per din 2391 pipe 28/2.5 , 42.2 o/d x 6.35 thk as per astm a106 gr.b pipe 42.2/6.35 , 48.3 o/d x 3.7 thk as per astm a106 gr.b pipe 48.3/3.7 , 60.3 o/d x 6.35 thk as per astm a106 gr.b pipe 60.3/6.35 , male stud coupling(part-a material for wagon tippler chp-i) , wcp 30sr with bonded seal (hyd. air type) mse-30s , cp 22lr with bonded seal (hyd. air type) msc-22l , cp 20sm with bonded seal w/o swivel nut (hyd. air type) msc-20s , cp 18lr with bonded seal (hyd. air type) mse-18l , cp 12sm with bonded seal w/o swivel nut (hyd. air type) msc-12s , cp 12lr ½ with bonded seal (hyd. air type) mse-12s/1-2 , straight coupling (part-a material for wagon tippler chp-i) , w c28l (hyd air type) sc-28l , w 24cnb one end swivel nut & weld nipple (hyd air type) sc-24l , w c18l one end swivel nut & weld nipple (hyd air type) sc-18l , w c12l (hyd air type) sc-12l , equal elbow(part-a material for wagon tippler chp-i) , we28l(hyd air type) el-28l , we22l(hyd air type) el-22l , we18l(hyd air type) el-18l , we12l(hyd air type) el-12l , equal tee(part-a material for wagon tippler chp-i) , to suit 60.3x6.35 tube to (butt weld type, 6000 psi) forged fitting as per asme b16.9-1993 et-b-60.3/6.35 , to suit 48.3x3.37 tube to (butt weld type, 3000 psi) forged fitting as per asme b16.9-1993 et-b-48.3/3.37 , w t28-l (hyd air type) et-28l , w t22-l (hyd air type) et-22l , sae flange ( butt weld type)(part-a material for wagon tippler chp-i) , 2 sae flange -6000 psi - butt weld type to suit 60.3x6.35 pipe with ‘o ring & 4 nos. m20x60lg socket head screw & spring washer ( avit type afsa 51-6) sae-f-2-60.3/6.35 , 2 sae flange -3000 psi - butt weld type to suit 60.3 x 6.35 pipe with ‘o ring & 4 nos. m12x45lg socket head screw & spring washer ( avit type afsa 51-3) sae-f-2-60.3/3.91 , 1½ sae flange -3000 psi - butt weld type to suit 48.3x3.7 pipe with ‘o ring & 4 nos. m12x1.75(p)x45lg socket hd screw & spring washer ( avit type afsa 38-6) sae-f-11/248.3/3.7 , 1½ sae flange -3000 psi - butt weld type to suit 48.3x3.7 pipe without ‘o ring &fastners ( avit type afs 38-3) sae-f-11/248.3/3.7 , 1½ sae flange -6000 psi - butt weld type to suit 42.2x6.35 pipe without ‘o ring & fasteners ( avit type afs 38-6) sae-f-11/242.2/6.35 , 1½ sae flange -6000 psi - butt weld type to suit 42.3x6.35 pipe with ‘o ring & 4 nos. m14x45lg socket head screw & spring washer ( avit type afsa 38-6) sae-f-11/242.2/6.35 , pipe clamp(part-a material for wagon tippler chp-i) , 42.2 o/d tube- pch. 1.48 (hyd air) pc-h-42.2 , 30 o/d tube- pch. 1.30 (hyd air) pc-h-60.6 , 22 o/d tube- pch. 1.22 (hyd air) pc-h-60.8 , 20 o/d tube- pch. 1.20 (hyd air) pc-h-60.9 , reducer fittings(part-a material for wagon tippler chp-i) , to suit with tube 60.3x3.91 to 48.3x3.7( butt weld type, 3000psi ) forged fitting as per asme b16.9-1993, schedule 40 rf-b-60.3/48.3 , to suit with tube 60.3x6.35 to 42.2x6.35( butt weld type, 6000psi ) forged fitting as per asme b16.9-1993 rf-b-60.3/42.2 , to suit with tube 48.3x3.7 to 28x2.5( butt weld type, 3000psi ) forged fitting as per asme b16.9-1993 rf-b-48.3/28 , to suit with tube 48.3x3.7 to 18x2( butt weld type, 3000psi ) forged fitting as per asme b16.9-1993 rf-b-48.3/18 , to suit with pipe 22 o/d to 12 o/d as per crs22 / 12l(hyd airtype) rf-22/12 , 1 (m)x1¼ (f) with copper washer (hyd air type) mfa-1/1-1/4 , 1/2 (m)x3/4 (f) with bonded seal (hyd air type) mfa-1/2-3/4 , 3/4 (m)x1 (f) with copper washer (hyd air type) mfa-3/4-1 , 3/4 (m)x1 (f) with bonded seal (hyd air type) mfa-3/4-1 , 1/4 (m)x1/2 (f) with bonded seal (hyd air type) mfa-1/4-1/2 , 3/8 (m)x1/2 (f) with bonded seal (hyd air type) mfa-3/8-1/2 , long radius elbow(part-a material for wagon tippler chp-i) , 90º elbow to suit with tube 60.3 o/d x 6.35 thk. forged fitting as per asme b16.9-1993 ( butt weld type,6000psi) e-lr-60.3 , 90º elbow to suit with tube 48.3 o/d x3.7 thk. schedule 40, forged fitting as per asme b16.9-1993 ( butt weld type,3000psi e-lr-48.3 , 90º elbow to suit with tube 42.2 o/d x 6.35 thk. forged fitting as per asme b16.9-1993 ( butt weld type,6000psi) e-lr-42.2 , throttle free swivel banjo connector (part-a material for wagon tippler chp-i) , w dbe30 special repair with bonded seal (hyd air type) bc-30s , tube- c.s (part-b material for side arm charger chp-i) , 25 o/d x 3 thk as per din 2391 he-tube/002 , male stud coupling(part-b material for side arm charger chp-i) , wcp 25sr(1x25) with bonded seal (hyd. air type) he/msc/001 , cp 12 sm (½ x12) with bonded seal (hyd. air type) he/msc/006 , straight coupling(part-b material for side arm charger chp-i) , w c25s one end swivel nut & weld nipple (hyd air type) he/sc/001 , w c25s (hyd air type) he/sc/002 , w c20s one end swivel nut & weld nipple (hyd air type) he/sc/003 , w c12s one end swivel nut & weld nipple (hyd air type) he/sc/004 , w c12s (hyd air type) he/sc/005 , sae flange ( butt weld type)(part-b material for side arm charger chp-i) , 1½ sae flange -6000 psi - butt weld type to suit 42.2x6.35 pipe with ‘o ring & 4 nos. m16x 50 lg socket head screw & spring washer ( avit type afsa 38-6) he/sae/001 , 1 ¼ sae flange -6000 psi - butt weld type to suit 42.2x6.35 pipe without ‘o ring & fasteners ( avit type afs 32-6)he/sae/002 , 1¼ sae flange -6000 psi - butt weld type to suit 42.2x6.35 pipe with ‘o ring & 4 nos. m14x 45 lg socket head screw & spring washer ( avit type afsa 32-6) he/sae/003 , pipe clamp (part-b material for side arm charger chp-i) , 25 o/d tube- pch. 1.25 (hyd air) he/psc/002 , reducer fitting(part-b material for side arm charger chp-i) , 1 (m) x 3/4 (f) with bonded seal (hyd air type) he/rf/001 , 1/2 (m) x 3/8 (f) with bonded seal (hyd air type) he/rf/002 , long radiouselbow(part-b material for side arm charger chp-i) , 90º elbow to suit with tube 42.2 o/d x 6.35 thk. forged fitting as per asme b16.9-1993 (butt weld type, 6000 psi) , throttle free swivel banjo seal(part-b material for side arm charger chp-i) , w dbe20 special repair with bonded seal (hyd. air type) , tube - c.s(part -c material for apron feeder chp-i) , 48.3 o/d x 7.14 thk. as per astm a106 gr.b he/t/001 , male stud coupling(part -c material for apron feeder chp-i) , wcp 25 special repair (1 x 25) with bonded seal (hyd air type) 25sr , female stud coupling cfp 25sr (1 x 25) with bonded seal (hyd air type) f-25sr , cp 18lm with bonded seal (hyd air type) 18sr , wcp 18lr with bonded seal (hyd air type) w18sr , straight coupling(part -c material for apron feeder chp-i) , wc 18l 18l , sae flange ( butt weld type)(part -c material for apron feeder chp-i) , 1½ sae flange-6000 psi-butt weld type - to suit 48.3 x7.14 pipe with ‘o ring (avit type afsa 38-6) he/38-6a , 1½ sae flange-6000 psi-butt weld type - to suit 48.3 x7.14 pipe without ‘o ring (avit type afsa 38-6) he/38-6b , 1½ sae flange-6000 psi-butt weld type - to suit 48.3 x7.14 pipe without ‘o ring (avit type afsa 38-6) with drill & tap. he/38/6c , 1 sae flange-6000 psi-butt weld type - to suit 33.7 x7.1 pipe with ‘o ring (avit type afsa 25-6) with 4 nos. m12 x40lgsocket head screw he/38-6d , reducer fitting (part -c material for apron feeder chp-i) , 1 (m) x ½ (f) (hyd air type) he/r/1-1/2 , to suit 33.7 x 7.1 pipe & 48.3 x 7.14 pipe (6000 psi) - 90lg , long radius elbow(part -c material for apron feeder chp-i) , 90º elbow to suit with tube 48.3 o/d x 7.145 thk. schedule 160, forged fitting as per asme b16.9 (6000 psi) he/e-48.6 , male stud coupling( part-d material for paddle feeder chp-i) , wcp 38 special repair 1/4 with bonded seal (hyd air type) 38sr , wcp 30 special repair with bonded seal (hyd air type) 30sr , wcp 25 special repair with bonded seal (hyd air type) 25sr , wcp 22 lane road with bonded seal (hyd air type) 22lr , wcp 22 lm with bonded seal (hyd air type) 22lm , cp 20 sm with bonded seal (hyd air type) 20sr , cp 20 special repair with bonded seal (hyd air type) 20sm , cp 18 lm with bonded seal (hyd air type) 18lm , cp 18 lane road with bonded seal (hyd air type) 18lr , straight coupling( part-d material for paddle feeder chp-i) , w c30s (hyd air type) c30s , w c22l (hyd air type) c22l , w c18l (hyd air type) c18l , equal elbow( part-d material for paddle feeder chp-i) , w e30s (hyd air type) e30s , w e25s (hyd air type) e25s , w e22l (hyd air type) e22l , equal tee( part-d material for paddle feeder chp-i) , w t25-s (hyd air type) t25s , w t22-l (hyd air type) t22l , w t18-l (hyd air type) t18l , pipe clamp (part-d material for paddle feeder chp-i) , 30 o/d tube - pch 1.30 (hyd air type) he/pp/30 , 25 o/d tube - pch 1.30 (hyd air type) he/pp/25 , 22 o/d tube - pch 1.30 (hyd air type) he/pp/22 , 18 o/d tube - pch 1.30 (hyd air type) he/pp/18 , reducer fitting(part-d material for paddle feeder chp-i) , 1 (m) x 3/4 (f) with bonded seal (hyd air type) he/r-1-3/4 , 3/4 (m) x 1 (f) with bonded seal (hyd air type) he/r-1-2/1 , 1/2 (m) x 3/4 (f) with bonded seal (hyd air type) he/r-1/2-3/4 , 3/8 (m) x 1/2 (f) with bonded seal (hyd air type) he/r-3/8-1/2 , plug(part-d material for paddle feeder chp-i) , 1/2 bsp he-p1/2 , 3/8 bsp he-3/8 , tube - c.s(part-e material for stacker reclaimer chp-i) , 38 o/d x 5 thk. as per din 2391 pipe-38/5 , 30 o/d x 4 thk. as per din 2391 pipe-30/4 , 30 o/d x 3 thk. as per din 2391 pipe-30/3 , 25 o/d x 4 thk. as per din 2391 pipe-25/4 , 20 o/d x 2.5 thk. as per din 2391 pipe-20/2.5 , 16 o/d x 2 thk. as per din 2391 pipe-16/2 , 12 o/d x 1.5 thk. as per din 2391 pipe-12/1.5 , 10 o/d x 1.5 thk. as per din 2391 pipe-10/1.5 , male stud coupling(part-e material for stacker reclaimer chp-i) , cp 38 special repair (hyd air type) msc-38s , ge 30 psr (with 11/4 bsp-m) msc-30s , ge 16 psr (with 1/2 bsp-m) msc-16s , wcp 12 special repair (hyd air type) msc-125 , straight coupling(part-e material for stacker reclaimer chp-i) , g 30 ps sc-30s , g 16 ps sc-16s , g 12 ps sc-12s , equal elbow(part-e material for stacker reclaimer chp-i) , butt weld type to suit 60.3 o/d pipe as per ansi b16.9-1993 ee-60.3 , butt weld type to suit 38 o/d pipe as per ansi b16.9-1993 ee-38 , equal tee(part-e material for stacker reclaimer chp-i) , to suit with pipe 38 o/d x 5 thk. pressure 400 bar thb-38s , t 38 ps et-38s , t 30 ps et-30s , sae flange (single piece system-butt weld type)(part-e material for stacker reclaimer chp-i) , 1½ sae flange, code-62, 6000psi with o ring (avit type -afsa) to suit 60.3 o/d pipe. saef-1 ½-60.3 , 1½ sae flange, code-62, 6000psi without o ring (avit type -afsa) to suit 60.3 o/d pipe. saef-1 ½-60.3 , 1½ sae flange, code-62, 6000psi with o ring (avit type -afsa) to suit 38 o/d pipe. saef-1 ½-38 , 1½ sae flange, code-62, 6000psi without o ring (avit type -afsa) to suit 38 o/d pipe. saef-1 ½ -38 , reducer fittings(part-e material for stacker reclaimer chp-i) , 1 bsp(m) x 1/2 bsp(f) mfa-1-1/2 , to suit 38 x 5 & 20 x3 x 3 pipes as perhyd air type w crs38/20s rf-38/20 , m14 x 1.5 (m) x 3/4 bsp (m) mma-m14-3/4 , plug in for 3/4 bsp(f) p-3/4 , 1 bsp(m) x 1¼ bsp(f) mfa-1.1/4 , 3/4 bsp (m) x 1¼ bsp (m) mma-3/4 -1.1/4 , socket weld type reducer to suit 30 o/d x 25 o/d pipe sw-r-30/25 , long radious elbow(part-e material for stacker reclaimer chp-i) , 45º bend butt weld type to suit 60.3 o/d pipe as per ansi b16.9-1993 el-b-60.3