tender for estimate for 8 km. 11 kv line cond. augmantation work ramgara s/s to ramgara agr under rehti d/c of (oandm) budni - 140 kg.,8.0 mtrs. long pcc pole 2 aaac raccoon conductor 0.075 sq. inch (80 sq.mm. al.eq.) 3 m s angle 65x65x6 mm 4 m s channel 100x50x6 mm 5 m s channel 75x40x6 mm 6 11 kv pin insulator polymer composit (5 kn) 7 11 kv(45kn) composite polymer disc insulators 8 11 kv strain hardware (t&c type) fittings 9 m.s.flat 50x6 mm 10 red oxide paint 11 aluminium paint 12 earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire 13 back filling of poles with boulders. 14 g.i. wires 4.0 mm. (8 swg) 15 danger boards enamelled 11 kv 16 aluminium binding wire and tape 17 jointing sleeves suitable for rabbit (55sq.mm.al. eq. ) aaac conductor 18 m.s.nuts with bolts 19 anti climbing devices ( barbed wire 2.24 mm dia, 14 swg) 20 stone block/pre cast block for base pedding(450x450x75mm) 21 additional erection charge 22 dismentelling 23 conductor acsr scrap( return material side to area store bhopal ) 24 labour charges & all fabrication charges (stc sub division will provide the raw material like m.s. angle, m.s. channel, m.s. flat, etc. to the contractor and the contractor will fabricate the itemslike v-cross arm, top clamp, d.c. channel, clamp, etc. as per site condition. those fabrication charges are included in the labour charges.) no extra amount will be paid. 25 transportation charges for all equipments & materialsfrom area store to site & site to area store bhopal 26 gst on transportation @5% 27 gst on (contractor side material + labour) @18%