tender for procurement of sail/tata/jindal/rinl make structural steel for chp under chp(mm), stps. , sailhard wear resist. ms plate,16 mm thk # sailhard or equivalent ms hardened plates. surface hardness or core hardness shall be at least 200 bhn. additional data: sailhard/tiscral/jsplhard, hardness shall be at least 200 bhn. minimum length:- 6000 mm minimun width :- 1500 mm make:- sail/tata/jindal , sailhard plate 10 mm thick additional data: sailhard/tiscral/jsplhard, hardness shall be at least 200 bhn. make:- sail/tata/jindal minimum length:- 3500 mm minimun width :- 1500 mm , plates,hot strip mill,thk 8 mm, # hot strip mill plates of thickness 8 mm is2062abc-06 is2062 e250 sk untrim additional data: sail/tata/jindal/rinl additional data: 1) length minmum- 6000 mm 2) width minimum- 1500 mm make- sail/tata/jindal , chequered plate, ms, 8mm thick # is:2062/84(re) additional data: is3502 , size: 8 mm x (1250 to 1500)mm width x ( 2500 to 6300 ) mm length. make:- sail/jindal/tata , galvanised, plate,ms,thick 3.15 mm additional data: width= 1250 mm length= 3100 mm base metal:- hr sheet is1079 hr1, make:- (sail/tata/jindal/rinl) galvanization standard:- hot dip galvanization as per is 2629:1985, micron-100 to 110. , ms angle size 75x75x8 mm is2062abc-01 # is2062 e250a sk additional data: make:-(sail/tata/jindal/rinl) standard length of minimum 09 mtr. , ms channel 75x40 mm is2062abc-01 is2062 e250a sk additional data: ismc-75x40 make:-(sail/tata/jindal/rinl) minimum length 10mtr. , ms channel,100x50x8 # additional data: ismc-100x50 sail/tata/jindal is -2062. minimum length:- 6 mtr. , ms channel 125x65 mm is2062abc-01 is2062 e250a sk additional data: ismc-125x65 make: sail / tata / jindal, minimum length 06 mtr. , ms flat 100x16 additional data: is 2062; minimum length 6 mtrs. , m.s. flats, 65 x 16mm # additional data: is 2062; minimum length 6 mtrs. , ms flat 50 x16 additional data: is 2062; minimum length 6 mtrs. , bar, 40 mm square bar,en-8 bar, 40 mm square bar,en-8