tender for special repair to r i office at kulurkumpa (block a) for the year 2025-26; 1.10 dismantling brick or stone masonry in lime or cement mortar under 3m (10’-0”) height including stacking the useful materials for reuse and removing the derbies within 50m lead away from the work site including cost of all labour with t & p,cess required for the work as per direction of engineer-in-charge. 2.00 earth work excavation in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth asper direction of the engineer-in-charge 3.00 earth work in excavation of foundation in all kinds of soil including hard moorum, stoney earth mixed with doublers (except sheet rock and boulders requiring blasting) with all leads & lifts including dressing & leveling the bed & depositing the excavated earth at places away from work site with all leads & lifts including cess and cost of all labour t&p & dewatering if required for the work etc. complete and as per specification and direction of engineer-in-charge 4.00 supplying and filling in foundation & plinth with sand in 23.5 cm (9) thick layers including watering and ramming with cost, conveyance, royality taxes of all materials, and labour with additional charges as decieded by the district administration, dmf & emf @15% on royality amount and labour charges, t&p etc. required for the work complete as per specification and direction of the engineer-in-charge. 5.00 providing cement concrete (1:3:6) with 40mm size crusher broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance taxes royality, labour of all materials, with additional charges as decieded by the district administration, dmf & emf @15% on royality amount and including hire & running charges of machineries t&p required for the work including supplying & working of pumps and cess as per the specifiction and direction of engineer-in- charge 6.00 fly ash brick masonary in cement mortar (1:6) in foundation using fly ash brick of 25 cm x 12 cm x 8 cm size having a crushing strength not less than 75kg per sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. with additional charges as decieded by the district administration, dmf & emf @15% on royality amount and including hire & running charges of machineries t&p required for the work including supplying & working of pumps and cess as per the specifiction and direction of engineer-in- charge 7.00 fly ash brick masonary in cement mortar (1:6) in superstrcuture using fly ash brick of 25 cm x 12 cm x 8 cm size having a crushing strength not less than 75kg per sq.cm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering & curbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. with additional charges as decieded by the district administration, dmf & emf @15% on royality amount and including hire & running charges of machineries t&p required for the work including supplying & working of pumps and cess as per the specifiction and direction of engineer-in- charge 8.00 cement concrete of proportion (1:2:4) using 12mm (1/2) size clean crusher broken grantie chips of approved quality from approved quarry including hoisting lowering and levelling in position to required level including frame work where necessary ramming and levelling cruing dewatering with cost conveyance taxes and royalties labour of all materials including hire and running charges of machineries t&p required for the work with cess etc, complete as per specification and direction of engineer-in-charge. 9.00 16mm (5/8) thick cement plaster in c.m. (1:6) finished smooth to inside surface of 10 thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with t&p required for the work with all taxes, royalties & cess etc, with additional charges as decieded by the district administration, dmf & emf @15% on royality amount and labour charges, t&p etc. required for the work complete as per specification and direction of the engineer-in-charge. 10.00 painting two coats with any approved enamel paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with t&p required for thework etc. complete in all respect as per direction of the engineer-in-charge. 11.00 providing & fixing of chequred tiles in floors treads (or) steps and landing on 25 mm thick bed of c.m (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete including cost of tiles watering & curing for 7 days with cost, conveyance, royalties, taxes of all materials & labour t&p and cess required for the work etc, complete in all respect with surface finishing with polishing materials as directed by engineer-in-charge. 12.00 finishing wall surface two coats with any approved weather coat over a coat of wall primer to outer wall surface after celaning surface including cost of paint and primer watering curing with cost conveyance and taxes of all materials and labour with t&p and cess required for the work etc, complete in all respect as per the direction of engineer-in-charge. 13.00 supplying , fitting and fixing of ms iron grill gate made out of (45 x 45 x 60) mm size angular frame with square bar ms flat for grills of approved design including all cost conveyance taxes etc complete as per specification and direction of the engineer-in-charge.