tender for rate contract of chain & chain spare , cane carrier chain (assembled) pitch-200mm breaking load-80000kgs side links- en-19 (hrc-30+5) rollers- en-8d (hrc-42+5) bush: en-353 (hrc-50+5) pin: en-353 (hrc-55+5) split pin: ss (as per drawing no. kki/ccc/panipat/2019/rev-1) rate should be given per meter basis , cane carrier chain castle nut (as per drawing no. kki/ccc/panipat/2019/rev-1) material- m.s , cane carrier chain side links (as per drawing no. kki/ccc/panipat/2019/rev-1) material- en-19 hardness: 30+ 5 , re-bushing with pin & nut of forged block type irc chain (rate required per meter basis) pich-229 mm material of bush-ss-410 bush hardness- 45+5 hrc material of pin- ss-410 pin hardness- 50+5 hrc i.d of bush should be same as per drawing. thickness of bush may be increase but below as per drawing not acceptable. , rack elevator threaded pin with nylock nut (as per drawing no. kki/bfcd/panipat/2019/rev-1) material- ss-410 hardness-50+5 hrc , rack elevator bush (as per drawing no. kki/bfcd/panipat/2019/rev-1) material- ss-410 hardness-45+5 hrc , bagasse carrier chain (assembled) pitch-200mm breaking load-60000kgs outer link- en-9 (hrc-20+5) inner link- en-9 (hrc-20+5) rollers- en-8d (hrc-40+5) bush: en-353 (hrc-50+5) pin: en-353 (hrc-55+5) castle nut 1 - m.s split pin: ss (as per drawing no. kki/bcc/panipat/2019/rev-1) rate should be given per meter basis. , bagasse carrier threaded pin with castle nut (as per drawing no. kki/bcc/panipat/2019/rev-1) material- en-353 hardness-50+5 hrc , bagasse carrier bush (as per drawing no. kki/bcc/panipat/2019/rev-1) material- en-353 hardness- 50+5 hrc , bagasse carrier chain roller (as per drawing no. kki/bcc/panipat/2019/rev-1) material- en-8d hardness- 40+5 hrc , bagasse carrier chain attachment link (as per drawing no. kki/bcc/panipat/2019/rev-1) , bagasse carrier link plate inner with slotted hole (as per drawing no. kki/bcc/panipat/2019/rev-1) , bagasse carrier link plate outer with slotted hole (as per drawing no. kki/bcc/panipat/2019/rev-1) , bagasse carrier link plate outer with round hole (as per drawing no. kki/bcc/panipat/2019/rev-1)