e-tender for procurement of some orthopaedic implants for two years from the date of award of contract (aoc) , group-xi , total amount-1 d1/p dcp(dynamic compression plate) with accessories [all implants should be made of titanium] 1.01 d1.01/p dcp(dynamic compression plate) narrow sizes : 4,5,6,7,8 hole 1.02 d1.02/p dcp(dynamic compression plate) narrowsizes : 9,10 ,11,12 hole 1.03 d1.03/p dcp(dynamic compression plate) broadsizes : 5 ,6,7,8 hole 1.04 d1.04/p dcp(dynamic compression plate) broadsizes : 9,10,11,12,13,14,16hole 1.05 d1.05/p dcp(dynamic compression plate) small sizes :3,4,5,6,7,8 hole 1.06 d1.06/p dcp(dynamic compression plate) smallsizes : 9,10 hole 1.07 d1.07/p reconstruction (re-con) platesize : 4 to 12 1.08 d1.08/p t shape buttress platesize: 4 to 12 hole 1.09 d1.09/p l shape buttress plate (right & left )size: 4 to 12 hole 1.1 d1.10/p semitabular plate 1/3 rdsize: 4 to 12 hole 1.11 d1.11/p cortical self taping screw - 4.5 mmsizes : 32 mm to 60 mm ( with 2 mm increment) 1.12 d1.12/p cortical self taping screw - 4.5 mmsizes : 12 mm to 30 mm ( with 2 mm increment) 1.13 d1.13/p cortical self taping screw - 3.5 mmsizes : 10 mm to 40 mm ( with 2 mm increment) 1.14 d1.14/p cancellous screw 4.5mm (full threaded) with washersize : 24 mm to 80 mm ( with 2 mm increment ) 1.15 d1.15/p cancellous screw 6.5mm (full threaded) with washersize : 25 mm to 110 mm ( with 5 mm increment ) 1.16 d1.16/p cancellous screw 6.5mm (32 mm threaded) with washersize : 40 mm to 110 mm ( with 5 mm increment ) 1.17 d1.17/p cancellous screw 4mm with washersize : 24 mm to 110 mm (with 2/5 mm increment ) 1.18 d1.18/p cancellous screw 4.5 mm with washersize : 44 mm to 100 mm ( with 2 mm increment ) 1.19 d1.19/p cancellous screw 6.5 mm with washersize :44 mm to 100 mm (with 2/5 mm increment) 1.2 d1.20/p solid cancellous screw 4.5 mm (full threaded)size : 24 mm to 120 mm ( with 2 mm increment ) 1.21 d1.21/p solid cancellous screw 6.5 mm (full threaded)size : 25 mm to 120 mm ( with 5 mm increment ) 1.22 d1.22/p solid cancellous screw 6.5 mm (32 mm threaded)size : 40 mm to 120 mm ( with 5 mm increment ) 1.23 d1.23/p cannulated cancellous screw 4 mm with washer size : 24 mm to 120 mm ( with 2 mm increment ) 1.24 d1.24/p cannulated cancellous screw 6.5 mm size : 44 mm to 100 mm ( with 2 mm increment ) group-ii 2 d2/p driving unit accessories (all items should be made of stainless steel) 2.01 d2.01(a)/p driving unit with 200 watt motor for electric drill includesstand, base, foot control, tool kit 2.02 d2.02/p drilling hand piece 2.03 d2.03/p reaming hand piece 2.04 d2.04/p oscillating saw hand piece 2.05 d2.05/p flexible shaft for driving unit 2.06 d2.06/p fixed head flexible reamer shaft 8mm 2.07 d2.07/p flexible reamer shaft for detachable head 8.5 mm to 12 mm 2.08 d2.08/p detachable head for flexible reamer shaft from 8.5 mm to 12 mm 2.09 d2.09/p saw blades (assorted sizes) group-iii 3 d3/p dhs plate with accessories [all implants should be made of titanium] 3.01 d3.01/p dhs plate with dcp hole 125, 130,135,140 degree (3h – 5 h) 3.02 d3.02/p dhs plate with dcp hole 125, 130,135,140 degree (6h – 8 h) 3.03 d3.03/p dhs plate with dcp hole 125, 130,135,140 degree (9h – 11 h) 3.04 d3.04/p dhs plate with dcp hole 125, 130,135 ,140 degree (12h – 18 h) 3.05 d3.05/p dcs plate with dcp hole 95 degree (6h – 8 h) 3.06 d3.06/p dcs plate with dcp hole 95 degree (9h – 10 h) 3.07 d3.07/p dcs plate with dcp hole 125, 130,135 degree (11h – 18 h) 3.08 d3.08/p screw, compression lagsize : 60mm to 100 mm (with 5 mm increment) 3.09 d3.09/p cortical self taping screw - 4.5 mmsizes : 12 mm to 30 mm ( with 2 mm increment) 3.1 d3.10/p cortical self taping screw - 4.5 mmsizes : 32 mm to 60 mm ( with 2 mm increment) 3.11 d3.13/p dhs plate with dcp hole 125,130, 135 ,140 degree (3h – 18 h) 3.12 d3.14/p trochanteric support plate (made of titanium with all sizes screws) 3.13 dcs instrument set (support only) 3.14 dhs instrument set ( should also contain variable angle guide and dhs threaded guide pin) (support only) group-iv 4 e2/p external fixation accessories (all items should be made of stainless steel) 4.01 e2.01/p universal ao clamp 4.02 e2.02/p ao rod for external fixation assorted sizes 4.03 e2.03/p spanner 8,9,10,11 & 12 4.04 e2.04/p rod to rod clamp for external fixation 4.05 e2.05/p t clamp for external fixation 4.06 e2.06/p clamp for mini external fixation. 4.07 e2.07/p rods for mini external fixation. 4.08 e2.08/p ao rod for external fixation assorted sizes :200,250,300,350,400,450 4.09 e2.09/p universal and rod to rod clamp for mini external fixation 4.1 e2.10/p rods for mini external fixation – carbon and stainless steel , sizes : 80 to 200 mm ( 20 intervals) 4.11 e2.11/p allen key group-v 5 f1/p fixed bipolar prosthesis [all implants should be made of ss] 5.01 f1.01/p fixed bipolar prosthesis (should contain fixed bipolar prosthesis – cemented)size : 37 mm to 41 mm (with 2 mm increment ) 5.02 f1.02/p fixed bipolar prosthesissize : 43 mm to 45 mm (with 2 mm increment ) 5.03 f1.03/p fixed bipolar prosthesissize : 47 mm to 53 mm (with 2 mm increment ) 5.04 instrument set for fixed bipolar prosthesis (support only) 5.05 f1.05/p fixed bipolar prosthesis - uncementedsize : 37 mm to 53 mm (with 2 mm increment ) group-vi 6 i1/p inter locking nail ( tibial nail ) [all implants should be made of titanium] 6.01 i1.01/p inter locking nail ( tibial nail )dia : 8,9,10,11 mmsize : 285 mm to 360 mm (with 15 mm increment) 6.02 i1.02/p inter locking nail bolt for tibial naildia - 4.9 mmsize : 28 mm to 70 mm ( with 4 mm increment ) 6.03 instrument for inter locking nail ( tibial ) (support only) 6.04 i1.04/p inter locking nail ( femur nail )dia : 8,9,10,11 mmsize : 280 mm to 440 mm (with 20 mm increment) 6.05 i1.05/p inter locking nail bolt for femur naildia - 4.9 mmsize : 28 mm to 70 mm ( with 4 mm increment ) 6.06 instrument for inter locking nail ( femur ) – should contain solid cannulated rimmer of sizes : 8 to 12 mm (support only) 6.07 i1.07/p humeral inter locking nail.dia : 7 ,8,9 mm28 to 40 cm in length (with 2 cm increment ) 6.08 i1.08/p locking bolt for humeral nail 3.4 mmsize : 24 mm to 46 mm (with 2 mm increment ) 6.09 i1.09/p end cap for humeral interlocking nailsize : 0 mm, 5 mm, 10 mm, 15 mm 6.1 instrument set for humeral interlocking nail - – should contain solid hand rimmer of sizes : 6 to 8 mm diameter (support only) group-vii 7 i2/p ilizarov external fixation tibia/femur (all items should be made of stainless steel) 7.01 i2.01/p 150/160/180 mm half rings 7.02 i2.02/p 2150/160/180 mm 5/8 th rings 7.03 i2.03/p threaded rods 100/150/200 mm 7.04 i2.04/p 6 mm nuts 7.05 i2.05/p connection bolt 16mm 7.06 i2.06/p connection bolt 10mm 7.07 i2.07/p wire fix bolt (slotted+canullated) 7.08 i2.08/p washer 7.09 i2.09/p post 2 (holes) 7.1 i2.10/p post 3 (holes) 7.11 i2.11/p rancho cubes 2 (holes) 7.12 i2.12/p rancho cubes 3 (holes) 7.13 i2.13/p trocar/ bayonet 1.8 mm 7.14 i2.14/p tapered pin 30/40/50 mm 7.15 i2.15/p 180/200/220 mm half rings 7.16 i2.16/p threaded rod 100/150/200 mm 7.17 i2.17/p femoral arch 90* large 7.18 i2.18/p femoral arch 120* large 7.19 i2.19/p femoral arch 90* small 7.2 i2.20/p femoral arch 120* small 7.21 i2.21/p oblique support 7.22 i2.22/p single pin fix clamp with 13 mm nut 7.23 i2.23/p hinges 7.24 i2.24/p post (male) 2/3/4 holes 7.25 i2.25/p post (female) 2/3/4 holes 7.26 i2.26/p twisted plate 2/4/6 holes 7.27 i2.27/p short connection plate with 2/3/4 holes 7.28 i2.28/p long connection plate 6/8/10 holes 7.29 i2.29/p conical washer 7.3 i2.30/p tapered schanz pin 150x30x6 mm 7.31 i2.31/p tapered schanz pin 170x40x6 mm 7.32 i2.32/p tapered schanz pin 200x50x6 mm 7.33 i2.33/p threaded rods 80/100/120/150/200/250/300/350/400/450 mm 7.34 i2.34/p half rings of sizes 100 – 240 mm (20 increment) 7.35 i2.35/p connection bolt sizes : 10, 16, 32 mm (centric and ecentric ) 7.36 i2.36/p rancho cubes 1 hole 7.37 i2.37/p rancho cubes 4 holes group-viii 8 l1/p llc dcp (locking limited bone contact dynamic compression plate) with accessories [all implants should be made of titanium] 8.01 l1.01/p llc dcp (locking limited bone contact dynamic compression plate) - smallsize : 5,6,7,8,9,10,11,12 hole 8.02 l1.02/p llc dcp (locking limited bone contact dynamic compression plate) - narrowsize : 5,6,7,8,9,10,11,12 hole 8.03 l1.03/p llc dcp (locking limited bone contact dynamic compression plate) - broadsize : 5,6,7,8,9,10,11,12,13,14,15 hole 8.04 l1.04/p proximal humeral anatomical locking plate - should contain sizes : 3, 4, 5 ,6,7,8,9,10,11,12 holed 8.05 l1.06/p proximal femoral anatomical locking plate - right & leftsize : 5,6,7,8,9 hole 8.06 l1.07/p proximal femoral anatomical locking plate - right & leftsize : 10 ,11, 12 hole 8.07 l1.08/p proximal tibial anatomical locking plate - medial (right & left )size : 4,5 ,6,7,8,9 ,10,11 &12 hole 8.08 l1.09/p proximal tibial anatomical locking plate - lateral (right & left)size : 4,5 ,6,7,8,9,10,12 hole 8.09 l1.12(a)/p proximal tibial anatomical locking plate 3.5mm - postero medial size : 3,4,5 ,6,7,8,9 hole 8.1 l1.13/p distal radial anatomical locking plate – ( right & left ) size : 4,5,6,7,8,9,10,11 & 12 hole 8.11 l1.14/p distal femoral anatomical locking plate - (right & left ) size : 4,5,6,7,8,9,10,11 & 12 hole 8.12 l1.15/p distal tibial anatomical locking plate 3.5 mm -( right & left ) medial sizes : 4 to 12 holed 8.13 l1.16/p reconstruction (re-con) locking platesize : 4 to 12 8.14 l1.17/p locking cortical screw 5 mmsize : 18 mm to 70 mm (with 2 mm increment) 8.15 l1.18/p locking cortical screw 3.5 mmsize : 12 mm to 60 mm (with 2 mm increment ) 8.16 l1.19/p locking cancellous screw 3.5 mmsize : 10 mm to 30 mm (with 2mm increment) 8.17 l1.20/p locking cancellous screw 3.5 mmsize : 35 mm to 70 mm (with 5mm increment) 8.18 l1.21/p locking cancellous screw 6.5 mmsize : 50 mm to 100 mm ( with 5 mm increment ) 8.19 l1.23/p proximal tibial anatomical locking plate 3.5 mm – lateral sizes : 5,6,7,8,9,10,11,12 holed (right & left ) 8.2 l1.24/p proximal tibial anatomical locking plate 4.5 mm – lateral sizes : 5,6,7,8,9,10,11,12 holed (right & left ) 8.21 l1.26/p distal radial anatomical locking plate 3.5 mm -( right & left ) volar sizes : 4,5,6,7,8,9,10,11 & 12 holed 8.22 l1.27/p distal radial anatomical locking plate 2.7 mm with screws -( right & left ) volar sizes : 2,3 4,5 holed 8.23 l1.28/p distal tibial anatomical locking plate -( right & left ) anterolateral sizes : 5,7,9,11,13 8.24 l1.29/p anatomical calcaneal locking plate - -( right & left ) sizes : 50,60,69 – p, q, y shapes 8.25 l1.30/p anatomical tibular locking plate - -( right & left ) sizes : 2,3,4,5,6,7,8,9 holed 8.26 l1.31/p graphics set for 3.5 mm plate large 8.27 l1.32/p graphics set for 4.5 mm plate large 8.28 l1.33/p anatomical clanicle plate 3.5 mm (medial) - sizes ( right & left ) : 6,7,8 8.29 l1.34/p anatomical clanicle plate(lateral) 2.7/3.5 mm with screws - sizes ( right & left ) : 4,5,6,7,8 8.3 l1.35/p clanicle hook plate 3.5 mm - sizes ( right & left ) : 3,4,5,6,7, 8.31 l1.36/p distal humerus extra-articular plate (right & left ) sizes: 4 -12 holed 8.32 l1.37/p distal humerus medial plate (right & left ) sizes: 3 -10 holed 8.33 l1.38/p distal humerus lateral plate (with-support ) sizes: 3 -12 holed (right & left ) 8.34 l1.39/p distal humerus lateral plate (without support ) sizes: 3 -12 holed (right & left ) 8.35 l1.40/p mini plates sizes : 1.5mm, 2.0mm, system (all shapes) 8.36 l1.41/p olecranon plates 3.5 mm (anatomical) (right & left) sizes : 3 to 12 holed 8.37 l1.42/p herbert screw 2.7 mm sizes : 14 to 62 mm 8.38 l1.43/p herbert screw 3.5 mm sizes : 14 to 62 mm 8.39 l1.44/p herbert screw 2.4 mm sizes : 14 to 62 mm group-ix 9 l2/p lrs external fixation – the rail fixation system : adult (all items should be made of stainless steel) 9.01 l2.01/p instruments trocar: 9.02 l2.02/p drill bits : 3.2 x 200 mm for lrs 9.03 l2.03/p drill bits : 4.8 x 200 mm for lrs 9.04 l2.04/p templates : for end clamp and central clamp for lrs 9.05 l2.05/p templates : for for swivel clamp for lrs 9.06 l2.06/p drill guides : 6 x 3.2 x 40 for lrs 9.07 l2.07/p drill guides : 6 x 3.2 x 80 for lrs 9.08 l2.08/p drill guides : 6 x 5 x 40 for lrs 9.09 l2.09/p drill guides : 6 x 5 x 80 : 8 nos. for lrs 9.1 l2.10/p drill guides : 5 x 2 x 43 mm for lrs 9.11 l2.11/p drill guides : 5 x 2 x 83 mm for lrs 9.12 l2.12/p screw guide : 8 x 6 x 60 mm for lrs 9.13 l2.13/p screw guide : 8 x 6 x 100 mm for lrs 9.14 l2.14/p allen key 6 mm for lrs 9.15 l2.15/p rail : 240 mm long for lrs 9.16 l2.16/p rail : 300 mm long for lrs 9.17 l2.17/p rial : 400 mm long for lrs 9.18 l2.18/p cd unit : 40mm for lrs 9.19 l2.19/p cd uit : 80mm for lrs 9.2 l2.20/p clamps: central clamp for lrs 9.21 l2.21/p clamps : end clamp : for lrs 9.22 l2.22/p clamps : swivel clamp : for lrs 9.23 l2.23/p clamps : ball & socket clamp standard for lrs 9.24 l2.24/p clamps : t-ball & socket clamp for lrs 9.25 l2.25/p clamps : graduated swivel clamp for lrs 9.26 l2.26/p dyna ring for lrs 9.27 l2.27/p t clamp : for lrs 9.28 l2.28/p sandwich plate : for lrs 9.29 l2.29/p bolt for sandwich plate : for lrs 9.3 l2.30/p elbow clamp for lrs 9.31 l2.31/p metaphyseal clamp for rail fixator for lrs 9.32 l2.32/p multi axial clamp for lrs 9.33 l2.33/p t-end clamp for lrs 9.34 l2.34/p tapered pin 6 mm to 5mm for lrs 9.35 l2.35/p length 130 mm thread length 30 mm for lrs 9.36 l2.36/p length 130 mm thread length 40 mm for lrs 9.37 l2.37/p length 130 mm thread length 50 mm for lrs 9.38 l2.38/p length 150 mm thread length 30 mm for lrs 9.39 l2.39/p length 150 mm thread length 40 mm for lrs 9.4 l2.40/p length 150 mm thread length 50 mm for lrs 9.41 l2.41/p length 170 mm thread length 40 mm for lrs 9.42 l2.42/p length 170 mm thread length 50 mm for lrs 9.43 l2.43/p length 170 mm thread length 60 mm for lrs 9.44 l2.44/p length 200 mm thread length 40 mm for lrs 9.45 l2.45/p length 200 mm thread length 50 mm for lrs 9.46 l2.46/p length 200 mm thread length 60 mm for lrs 9.47 l2.47/p tapered 6 mm to 5 mm - with hydroxyapetite coating for threads for lrs 9.48 l2.48/p container for rail fixator system for appliances for lrs 9.49 l2.49/p container for rail fixator system implants for lrs group-x 10 m1(a)/p modular uncemented bipolar prosthesis [ stem should be made of titanium ha coated, femoral head should be made of lvm/cocr /titanium & bipolar monoblock shell should be made of lvm/cocr /titanium] implants should be mri compatible 10.01 m1(a).01/p modular uncemented bipolar prosthesis - modular stem – titanium ha coated (should contain sizes : s, m, l, xl, double xl) 10.02 m1(a).02/p modular uncemented bipolar prosthesis - modular femoral head - lvm/cocr /titanium (should contain cup sizes : 37 to 55 and head sizes – 22, plus 0/22,plus 4 & 28 -plus 0 / 28, plus 4/28, plus 8/28,minus 4 10.03 m1(a).03/p modular uncemented bipolar prosthesis - modular bipolar monoblock shell – lvm/cocr /titanium 10.04 modular bipolar prosthesis - instrument set for modular bipolar- should contain centralizer & cement restrictor (support only) group-xi 11 m2/p modular cemented bipolar prosthesis [stem should be made of titanium/ssllvm/cocr & head should be made of titanium/cocr/316lvm] 11.01 m2.01/p modular cemented bipolar prosthesis - modular stem - titanium/ssllvm/cocr (should contain sizes : s, m, l, xl, double xl) 11.02 m2.02/p modular cemented bipolar prosthesis - modular bipolar head - titanium/cocr/316lvm (should contain cup sizes : 37 to 55 and head sizes – 22, plus 0/22,plus 4 & 28 -plus 0 / 28, plus 4/28, plus 8/28,minus 4 11.03 modular bipolar prosthesis - instrument set for modular bipolar- should contain centralizer & cement restrictor (support only) group-xii 12 n/p driving unit accessories for neurology(all items should be made of stainless steel) 12.01 n1.01/p perforator hand piece with 1 ps cutter 12.02 n1.02/p craniotome hand piece with 5 pcs cutters 12.03 n1.03/p perforator cutter 8mm 12.04 n1.04/p perforator cutter10mm 12.05 n1.05/p perforator cutter 12mm 12.06 n1.06/p craniotome cutters 12.07 n1.07/p craniotome anchor with cap