maintenance and repair and other miscellaneous civil works at rg ocm-i chp, rg-iii area.-clearing light jungle / shrub jungle 15000.000 3.80 57000.00 sqm 3.4 2 earth work excavation for foundations and depositing on bank for all lifts and with an initial lead up to 50m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting, etc. complete for finished item of work as per ss 20 b (apss 308) ordinary soil manual means up to 3 m depth 100.000 243.20 24320.00 cum 3.1.1 3 filling with excavated earth (excluding rock)/ sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of t and p etc., complete for finished item of work. (apss no. 309 and 310) (excluding cost of sand) by manual means 100.000 34.50 3450.00 cum 3.3.1 4 cement concrete 1:4:8 with 40 mm size crushed granite metal of approved hard quality in foundations or plinths etc., complete (but excluding cost of cement) with concrete mixer 8.000 3444.17 27553.36 cum 4.2 5 cement concrete 1:3:6 with 40mm down size (50% of 40 20mm, 30% of 20 10mm and 20% of 10 4.75mm) graded crushed granite metal of approved hard quality including machine mixing, vibrating, etc., complete for finished item of work as directed for side walls of drains or basement/ substructure of the buildings (excluding cost of cement, centering and shuttering charges) (ca : 0.90 cum, fa:0.45cum) 8.000 3487.27 27898.16 cum 4.3.1 6 add extra for shuttering and centring charges for cc basement / sidewalls, water tank walls 40.000 393.10 15724.00 sqm 4.3.3 7 cement concrete 1:2:4 with 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal of approved hard quality inclusive of shuttering/centering charges for bed blocks, encasing joists/ rails, holdfasts of doors and windows, etc. complete (but excluding cost of cement) with concrete mixer (ca : 0.90 cum, fa:0.45cum) 5.000 4631.87 23159.35 cum 4.10.2 8 labour charges for cutting, bending and binding reinforcement with contractors binding wire, and placing in position as directed by engineer in charge including all leads, etc., complete 1.500 13984.40 20976.60 tonne 5.5 page 1 of 8   work code no: slno rg3/01/r23/5200 sr item & description quantity rate amount unit 9 reinforced cement concrete 1:2:4 with 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal of approved hard quality for precast rcc slabs, purlins, verandah posts, fencing posts etc. including machine mixing of concrete, necessary shuttering, finishing etc including hoisting/fixing, cost and conveyance of all materials to work site, all labour charges, all operational incidental charges (excluding cost of steel and its fabrication charges and cost of cement) etc., complete for finished item of work, as directed. (ca : 0.90 cum, fa:0.45cum) 10.000 6762.77 67627.70 cum 5.7 10 flyash brick masonry with bricks of size 225x100x60mm with 50kg/cm2 compressive strength in c.m.1:6 for superstructure including scaffolding etc., (but excluding cost of cement) complete. 5.000 6724.31 33621.55 cum 7.1 11 binding wall 225x225mm size with brick in cement mortar 1:6 with fly ash bricks of compressive strength 50kg/cm2 with 20mm thick plastering with cement mortar 1:6, with cornice 100x 100mm ( but excluding cost of cement ) 5.000 612.17 3060.85 rm 7.14 12 binding wall 225 x 225mm size with brick in cement mortar 1:6 with fly ash bricks of compressive strength 50kg/cm2 with 20mm thick plastering with cement mortar 1:6, without cornice (but excluding cost of cement ) 5.000 496.80 2484.00 rm 7.15 13 plastering to brick masonry with cement mortar 1:6, 12mm thick including raking out of joints ( but excluding cost of cement ) 200.000 153.38 30676.00 sqm 10.1 14 plastering to brick / stone masonry with cement mortar 1:6, 20 mm thick in two coats including raking out of joints for walls only ( but excluding cost of cement ) 200.000 318.59 63718.00 sqm 10.4 15 providing gultha in cm 1:6, 20 mm thick and 150 mm wide including necessary scraping of wall and finishing the surface as directed ( but excluding cost of cement ) 30.000 34.43 1032.90 rm 10.8 16 roofing/side sheeting with a.c corrugated sheets 6mm thick including cost and conveyance of ac sheets, 8mm dia g.i j bolts, gi washers, bitumen washers and labour charges including fixing of wind ties as per the requirement etc., complete (with /without ridges / valley gutters) for finished item of work (cost of wind ties and its fabrication charges are not included) 100.000 404.90 40490.00 sqm 11.1 17 labour charges for fixing ac sheets for roofing/side sheeting including cost of 8mm dia j bolts and nuts, bitumen washers, 8mm dia plain gi washers including fixing of wind ties as per the requirement etc., (with /without ridges) complete for finished item of work (cost of wind ties and its fabrication charges are not included) 100.000 108.80 10880.00 sqm 11.2 18 100.000 796.90 79690.00 sqm 11.9 page 2 of 8   work code no: slno rg3/01/r23/5200 sr item & description quantity rate amount unit roofing/side sheeting with pre painted galvalume trapezoidal profile roofing sheets with 0.50mm thickness, coating: alu zinc coating az150 gsm. tensile strength: 550 mpa. paint coating: regular modified polyester painting. painting thickness (top): 18 to 20 microns, (bottom): 5 to 7 microns. sheet width: 1.020, length: maximum 12 meters with regular range colours fixed with suitable bolts, nuts and washers, including fixing of wind ties as per the requirement etc., and including cost and conveyance of all materials etc., complete (with / without ridges/ valley gutters) for finished item of work as directed. (cost of wind ties and its fabrication charges are not included) 19 dismantling g.i sheets, ac sheets in sides and roof including ridging etc., 80.000 71.90 5752.00 sqm 11.8 20 providing and fixing thermocole false ceiling 600mmx 600mm using 19mm thick thermocole sheet, anodised aluminium tee sections of size 24.50mm x 24.0mm x 2.4mm in grid with cross tee of size 24mm x 24.5mm x 2.4mm at every 600mm c/c and anodised aluminium wall angle of size 24mm x 24mm x 2.4mm fixed to periphery of the wall and the above grid is suspended at every 1200mm c/c in both directions using 2.0mm thick gi wire including cost and conveyance of all materials to site etc., for finished item of work as directed. holding down clips to be used for fixing thermocole sheets. 80.000 639.80 51184.00 sqm 12.1 21 flooring 40mm thick with cc1:2:4 using 20mm down size ( 65% of 20 10mm and 35% of 10 4.75mm ) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. ( but excluding cost of cement ) 40.000 275.91 11036.40 sqm 14.2 22 flooring 50 mm thick with cc 1:2:4 using 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal of approved hard quality on existing concrete base, rendering smooth complete. (but excluding cost of cement ) 60.000 312.51 18750.60 sqm 14.3 23 flooring with non skid ceramic floor tiles of size 400 x 400 mm and thickness between 7 8 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:6), 12 mm thick over cc bed already laid or rcc roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm and jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials, labour charges etc., complete for finished item of work, (but excluding cost of cement ) 40.000 865.02 34600.80 sqm 15.1 24 providing skirting /risers of steps with ceramic wall tiles of size 200 x 300mm / 245mm x 325mm with 6 mm thick 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs and length equal to flooring tiles, set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( but excluding cost of cement ) 10.000 527.62 5276.20 sqm 15.2 page 3 of 8   work code no: slno rg3/01/r23/5200 sr item & description quantity rate amount unit 25 providing dadooing to walls with ceramic wall tiles of size 200x300mm / 245mm x 325 mm and thickness 6 mm 1st quality conforming to is:13711, is:13712, is:13630 (parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cm (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost and conveyance of all materials, labour charges etc., complete for finished item of work,( but excluding cost of cement ) 5.000 696.82 3484.10 sqm 15.3 26 supply and fixing of cement bonded particle board (conforming to is 14862) door shutter with all round style “u” lipping size 15 x 18 x 15 mm made from 0.8mm thick powder coated cold rolled steel profiles with 16 mm thick cement bonded particle board with necessary screws fixed at 1’ 0” interval including cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint with following ms powder coated fittings as per approved design for finished item of work single shutter as per approved make a). ms nickel coated coated 250mm long aldrops 2 nos , b). ms powder coated 250mm long tower bolt with 10mm dia shoot 1 nos, c). 1no. ms powder coated 150mm long grip handle, d). 1nos. m.s. powder coated door stopper. 5.000 1817.80 9089.00 sqm 16.18 27 supply and fixing of cement bonded particle board (is 14862) door shutters using with 16mm thick with all round style “u” lipping size of 20mm x18mm x20mm made from 0.6mm thick galvanized pre painted cold rolled steel profiles with cement bonded particle board separating two shutter with 30mm x20mm x30mm stepped lipping including cost and conveyance of all materials at site and applying one coat of primer, 2 coats of luppam and 2 coats of synthetic enamel paint as per approved design for finished item of work bison panel(is 14276) double door shutter with necessary screws fixed at every 1foot (304.8mm) intervals and including the following ms powder coated fittings. etc., complete finished item of work as per approved make a). 250 mm long aldrops 2nos. b). 250mm long tower bolt with 10mm dia shoot 2nos c). 2nos 125 mm long grip handle d) 2 nos. door stopper 5.000 2308.10 11540.50 sqm 16.19 28 painting to wood work/ plastered surfaces with two coats of synthetic enamel paints of grade ii of approved make, shade to old works complete for finished item of work. 50.000 115.10 5755.00 sqm 17.2 29 painting to iron work with two coats of synthetic enamel paint of grade ii of approved make and shade including a base coat of red oxide primer paint of grade i of approved make making 3 coats to new work all complete for finished item of work. 100.000 170.80 17080.00 sqm 17.7 30 painting with two coats of synthetic enamel paints of grade ii paints of approved make and shade to old iron work complete for finished item of work. 50.000 103.00 5150.00 sqm 17.8 31 white washing to old walls with surya cem / equivalent cem, two coats complete for finished item of work. 500.000 26.20 13100.00 sqm 18.2 page 4 of 8   work code no: slno rg3/01/r23/5200 sr item & description quantity rate amount unit 32 white washing to old walls with surya cem / equivalent cem, one coat complete for finished item of work. 500.000 17.70 8850.00 sqm 18.4 33 whiting to old ceiling with surya cem / equivalent cem, two coats to give an even shade complete for finished item of work. 100.000 28.90 2890.00 sqm 18.6 34 whiting to old ceiling with surya cem / equivalent cem ,one coat complete for finished item of work. 100.000 17.70 1770.00 sqm 18.7 35 colour washing to old walls with surya cem / equivalent cem adding required colour two coats complete for finished item of work. 1000.000 28.00 28000.00 sqm 19.2 36 oil bound distempering to old walls with 2 coats of approved make distemper complete for finished item of work. 250.000 67.40 16850.00 sqm 20.2 37 acrylic exterior emulsion painting to old walls 2 coats with grade i i.e., apex or equivalent paint of approved make complete for finished item of work 100.000 115.00 11500.00 sqm 20.8 38 acrylic exterior emulsion painting to new walls with grade ii i.e., ace or equivalent paint of approved make 2 coats over a base coat of grade ii primer (making 3 coats in all) complete for finished item of work for external walls 100.000 167.40 16740.00 sqm 20.9 39 acrylic exterior emulsion painting to old walls 2 coats with grade ii i.e., ace or equivalent paint of approved make complete for finished item of work for external walls 100.000 104.00 10400.00 sqm 20.10 40 fabrication of structural steel components like stanchions, built up columns, trestles, beams, trusses, n girders, chequered plate walk way etc., including all leads and lifts at site etc., with companys steel sections but with contractors welding rods, bolts, rivets and all contingencies, power charges, etc., complete as per drawings and instructions of the engineer in charge. 6.000 18178.40 109070.40 tonne 25.1 41 erecting companys steel stanchions, built up columns, trestles, beams, trusses, n girders, chequered plate walk way etc., with contractors tackle, derric, crane etc., complete 6.000 10225.40 61352.40 tonne 25.2 42 fabrication of structural steel components like purlins, louvers, sag rods, rafters etc., including all leads and lifts at site etc., with companys steel sections but with contractors welding rods, bolts, rivets and all contingencies, power charges, etc., complete as per drawings and instructions of the engineer in charge. 3.000 14770.00 44310.00 tonne 25.3 43 3.000 9089.20 27267.60 tonne 25.4 page 5 of 8   work code no: slno rg3/01/r23/5200 sr item & description quantity rate amount unit erecting companys steel purlins, louvers, sag rods, rafters etc., with contractors tackle, derric, crane etc., complete 44 labour charges for fabrication of steel works like window grills, compound wall grills, iron doors, windows, verandah grils and window guard bars including cost of welding rods, power charges etc., ( excluding cost of fixing in position) 100.000 34.10 3410.00 kg 25.5 45 labour charges for fixing of window grills, compound wall grills, iron doors, windows, verandah grils, and window guard bars in position etc., complete. 100.000 5.70 570.00 kg 25.6 46 supplying, laying, fixing and commissioning the swr pipes of prince / sudhakar / kisan / supreme or any isi brand swr pipe (as per isi standards) type a pipes (pvc / swr pipe 4kg / sq.cm ) for rain water and vent pipes of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings for 110mm dia 3m double socket pipe 10.000 1055.30 10553.00 each 28.1.3 47 supplying, laying, fixing and commissioning the swr pipes of prince/sudhakar/ kisan/ supreme or any isi brand swr pipe (as per isi standards) type b pipes (pvc/swr pipe 6 kg/sq.cm) for soil and sullage water of any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice excluding cost of fittings. for 110mm dia 3m double socket pipe 10.000 1490.40 14904.00 each 28.2.3 48 construction of 450mm x 450mm and 450mm depth inspection chamber with cc 1:4:8 base of 150mm thick 40 mm crushed granite metal and 225 mm thick brick masonary walls in cm 1:6 with fly ash bricks of size 225 x 100 x 60mm with 50kg/sq. cm compressive strength and plastering with cm 1:4; 12mm thick including rendering the surfaces smooth both inside and outside and channelling to required slope including supply and fixing precast rcc 1:2:4 cover of 50mm thick and 600 x 600mm size with 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal, including earthwork excavation to the required depth etc; complete for finished item of work (but excluding cost of cement steel and its fabrication charges.) 5.000 3112.76 15563.80 each 28.36.1 49 extra depth of 450mm x 450mm inspection chamber beyond 450mm depth (excluding cost of cement) extra for every 0.100m (100mm) depth 15.000 470.64 7059.60 each 28.36.2 50 construction of 900mm dia and 450mm depth circular manhole with cc 1:4:8 base of 150mm thick with 40 mm crushed granite metal, 225mm thick brick masonry walls in c.m 1:6 with flyash bricks of size 225x100x60mm and having compressive strength of 50 kg/sqcm, plastering with cm 1:4,12mm thick including rendering the surfaces smooth both inside and outside and benching with 100mm thick cc 1:2:4 with 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal and channelling to required slope including supply and fixing precast rcc 1:2:4 cover of 50mm thick and 600mm dia using 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal, including earth work excavation to the required depth etc. complete for finished item of work (but excluding cost of cement, steel and its fabrication charges.) 5.000 4612.75 23063.75 each 28.35.1 page 6 of 8   work code no: slno rg3/01/r23/5200 sr item & description quantity rate amount unit 51 extra depth of circular man hole of size 900mm dia( excluding rock cutting) beyond 450mm depth (excluding cost of cement) extra for every 0.100m(100mm) depth 25.000 691.97 17299.25 each 28.35.2 52 supplying and fixing 580 x 440mm orissa pan white glazed w.c first quality isi marked conforming to is 2556 part 3 2004 with p or s trap 5.000 2399.80 11999.00 each 28.47.1 53 supplying and fixing wash down european water closet of first quality conforming to is 2556 part 2 2004 of white glazed with p trap. plastic seat and lid is to be paid extra. 10.000 2118.90 21189.00 each 28.49.1 54 supply and fixing of pvc low level cistern with internal components and short bend, 10 ltrs capacity dual flush 10.000 2217.60 22176.00 each 28.51.2 55 supplying and fixing 15 mm nominal bore g.i pipe medium grade properties and weight as per is 1239 isi mark with g.i fittings including the cost of pipe and its fittings like sockets, elbows, bends, tees, etc., and labour charges complete 20.000 237.10 4742.00 rm 28.6.1 56 supplying and fixing indian make flat back wash hand basin 1st quality conforming to is: 2556 part 4:1972 with waste fittings like 32mm nominal size c.p. fitting with parallel pipe thread conforming to is:2963 1979 and fitted with 15mm nominal bore chromium plated pillar tap of 1st quality indian make 400grams seiko/senior/ nice/ esso or equivalent complete with standard ci brackets including wooden block: 550x400mm single c.p. pillar cock 4.000 2533.80 10135.20 each 28.57.1 57 conveyance charges of steel including loading, unloading and stacking charges for 2 km lead. 10.500 284.42 2986.41 tonne 34.8.2 58 conveyance charges of cement including loading, unloading and stacking charges for 5 km lead. 24.942 276.20 6888.98 tonne 34.9.5 59 conveyance charges of cement including loading, unloading and stacking charges for beyond 5km and upto 30km(rate/km) lead. 199.536 10.10 2015.31 kmmt 34.9.6 60 reinforced cement concrete 1 : 1.5 : 3 with 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and cost of cement) (ca : 0.90 cum, fa:0.45cum) for column footings / raft 12.000 6986.27 83835.24 cum 5.1.1 61 15.000 6433.47 96502.05 cum 5.1.10 page 7 of 8   work code no: slno rg3/01/r23/5200 sr item & description quantity rate amount unit reinforced cement concrete 1 : 1.5 : 3 with 20mm down size (65% of 20 10mm and 35% of 10 4.75mm) graded crushed granite metal from approved quarry including cost and conveyance of all materials like sand, coarse aggregate, water etc., to site and including machine mixing and vibrating with mechanical vibrators, finishing, and centering/shuttering charges, etc, (but excluding cost of steel reinforcement and its fabrication charges and cost of cement) (ca : 0.90 cum, fa:0.45cum) for precast rcc sleepers but excluding hoisting / fixing charges