tender for welcome maintenance of offrs md accn at 14 gtc subathu under ge kasauli. - taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by engineer-in-charge. taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by engineer-in-charge. taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by engineer-in-charge. taking down shutters of any description n. exc 1 sqm from chowkhat and removing at site as equired complete all as specified & directed by engineer-in-charge. supply and fixing 125 x 60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, peg etc complete all as specified . supply and fixing 105x60mm pressed steel frames 1.25mm thick for doors,windows with one or more rebates incl necessary fixing hinges, lugs, hinges lock, strike plate, hold fasts, peg etc complete all as specified . material and labour for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by engineer-in-charge. supply and fixing factory made plain, framed, panelled shutters, 35mm thick of 2nd class hard wood (hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat one coat of pink primer, complete all as specified & directed by engineer-in-charge. supply and fixing 2nd class hard wood 35mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in ssr part-1, section 8, clause 8.24 (a) complete all as specified and directed supply and fixing solid pvc door frame of the size 50mm width , 47 mm height with a wall thickness of 5mm(+0.25) made out of extruded 5mmmade out of 5mm pvc sheet reinforced with ms square tube as per specification drying as per manufacture instructions including all necessary fitting complete. supply and fixing 30mm thick factory made solid panel pvc door shutters made out of ms tubes of top and bottom rail ms frame shall be covered with heat moulded pvc \c\ channel 5mm thick and having width of 50mm for from stiles and h section of 100mm wide for the rails, the inner panel 6mm thick pvc sheet insulated between frame and panel should be struck to the stiles and rails 50x30x5 mm, channel rails 100x30x5 mm h junction. the size, design and pattern of the paneled shutter shall be proceed by ge / eng-in-charge and all as per drawing / manufacture instructions complete all as specified including locking device and all necessary fitting etc here and after complete material & labour for plain cement concrete type b-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.