tender for providing, laying, spreading of graded stone aggregate (wmm) after mixing with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% opc cement and 3.50% emulsion in uniform single layer on sub base/ subgrade and compacting with the road roller to achieve the desire density. including all taxes, labour cess etc but excluding gst. , providing and applying tack coat with bitumen vg-10 using bitumen distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503. including cost of material, bitumen & labour cess etc but excluding gst. , providing and laying bituminous concrete grade-2 with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder(vg-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects including cost of material, bitumen & labour cess etc but excluding gst. , providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is excludive of surface applied glass beads as per irc:35. the finished surface to be level, uniform and free from streaks and holes. including all taxes, labour cess etc but excluding gst.