tender for earthwork in cutting or in embankment in ordinary soil with cartage of earth from 8 km as per si no 253(a) , 261© , construction of granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achive desire density complete as per technical specification clause as per mord 401 , concrete work in 1:6:12 cement, c/ sand, and 40 mm brick ballast including supply of all materials, labour , t & p etc. as per s.i.no 273 , m-150 class boundary wall in 1:4 cement, coarse sand 1.25 f.m motar in foundation and plinth including supply of all materials, labour , t & p etc. as per p.w.d. s.i. no. 305(a) , construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with grade cementcoarse aggregate not exceeding 25 mm, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of construction and construction joints, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and finished with power trowel cum floter-trimix flooring machine.technical specification clause 1501. , 12 mm thick plaster in 1:4 cement and coarse sand mortar on brick work minimum thickness not to be less than 1 cm. including supply of all materials, labour,t & p etc. as per si no 584(a) , plain cement concrete work in 1:2:4 cement, c/ sand, and 20 mm stone grit including supply of all materials, labour , t & p etc. as per s.i.no 279(a) , reinforced cement concrete work 1:1.5:3 in cement c.sand and 20 mm stone grit in door sills, chaukhat, boundry post etc as per si no 282(a) for road xing , m.s. (tor steel or plain) in plain work such as reinforced cement concrete or r.b. work including bending for proper shape and including supply of steel & its wastage. bend hooks, and authorised overlapping shall be measured and including cost of bindng wire. , supply and fixing of granite stone with complete work details engraved , add 18 % gst amount