bids are invited for 2 pu holding bar 95 shora a hardness with the lock plate arrangement and 8.8 grade high tensile fasteners alongwith nylok nuts as per the sampleprovided. 5000001275_2_12102032180 pu primary scrapper element consisting of scraper blade (95 shore ajand its holder (75-80 shore a) with 8.8 grade high tensile fastenersalongwith nylok nuts as per the sample provided 5000001275_3_12102032140 pu liner, 30mm x 500 mm x 500 mm with 8.8 grade high tensile fastenersalong with nylok nuts as per the sample provided. material cast polyurethane suitable for bauxite handling hardness: 95 shore atensile strength: 45 mpa100% modulus: 14.3 mpa300% modulus 34 mpaangle tear strength: 96 kn/mtrouser tear strength: 44 kn/melongation: 390 ndin resilience: 40 %bashore rebound: 48 %din abrasion resistance 10n (mm3): 70din abrasion resistance 5n (mm3): 25compression set/22 hr at 70 deg c:32 %cured specific gravity (g/cm3) 1.13test method: a51683.15,as1683.11 as1683.12,as1683.21,asi683.13, as1683.4party shall provide test certificates confirming to the above standardsfor pu liners 5000001275 4 12102032150 pu liner, 40mm x 500 mm x 500 mm with 8.8 grade high tensile fastenersalongwith nylok nuts as per the sample provided. material cast polyurethane suitable for bauxite handling hardness: 95 shore atensile strength: 45 mpa 100% modulus: 14.3 mpa300% modulus: 34 mpaangle tear strength: 96 kn/mtrouser tear strength: 44 kn/melongation: 390 %din resilience: 40 %bashore rebound: 48 %din abrasion resistance 10n (mm3): 70din abrasion resistance sn (mm3): 25compression set/22 hr at 70 deg c:32 %cured specific gravity (g/cm3) 1.13test method: as1683.15,as1683.11 as1683.12,as1683.21,asi683 13,as1683.4party shall provide test certificates confirming to the above standardsfor pu liners 5000001275_5_12102032190 pu mouth piece for vs-1001 5000001275 6 12102032200 pu torque arm bush for reclaimer-1 <(>&<)> 3for lt drive. total quantity : 790