tender for shotcreteing work at track hopper through capex 2025-26-1 providing and laying 50 mm thick shotcreteing work as per enclosed specification (specification#i) & direction of eic in existing track hopper at ktps with all consumables, labour, tools & tackles complete in all respect. 2 cleaning the concrete surface by removing dirt and debris, marking defective locations and removing loose concrete by careful stripping until hard surface is exposed, cutting the concrete to regular shape, wire brushing the exposed surface and removing debris from site complete as per direction of the engineer - in - charge. 3 cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturers specification] [mode of measurement: the affected surface area of reinforcement shall be considered for payment] 4 applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturers specified time as per manufacturers specification. (0.4 kg / m² of concrete surface). 5 steel reinforcement for rcc work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500 d or more. 6 welding in m.s. structural work with gas or electric: (a) tack weld 7 hire charges of one hilty machine with operator for dismantling of rcc or pcc including cleaning of site.