tender for work of maintenance of ht/lt lines in the area of edd-jalesar under edc, etah. - safe carriage of 8.5 mtr. long pcc pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 60 km. including loading & unloading at both ends. 2 safe carriage of11/13 mtr stpfrom store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 60 km. including loading & unloading at both ends. 3 safe carriage of9 mtr stpfrom store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 60 km. including loading & unloading at both ends. 4 safe carriage of line material from store center etah/nearest substation to pit site in distance range 0 to 60 km. including loading & unloading at both ends. 5 opening of binding & removal of following conductor with 33 kv/ht/lt line from broken pcc poles/rails/ stp and stacking at safer place. 6 1- dog/ raccoon/ rabbit conductor 7 2- aaac/acsr weasel conductor/ gi wire. 8 3- abc 3x95+1x35+1x16/3x50mm 9 4- abc 3x120+1x70+1x16 10 erection of 8.5 mtr. long pcc poles as single support including fixing of all ht/lt accessories etc. complete.pole should be grouted properly as per dvvnl/respo normes 11 erection of 9 mtr. stp as single support including fixing of all ht/lt accessories etc. complete.pole should be grouted properly as per dvvnl/respo normes 12 errection of 11/13 mtr.stp as single support including fixing of all ht/lt accessories etc. complete.pole should be grouted properly as per dvvnl/respo normes 13 errection of 8.5 mtr. long pcc poles as double pole/ section pole including drilling,cutting etc. andfixing of all accessories etc. complete. 14 errection of 11mtr. stp as double pole/ section pole including drilling,cutting etc. andfixing of all accessories etc. complete. 15 laying stringing & sagging of 3 phase 3 wire 33/ht/lt line with following condudctor including binding & nozzling. 16 1- dog/ raccoon/ rabbit conductor 17 2- aaac/acsr weasel conductor/ gi wire. 18 3-abc 3*95 mm/3*50 mm 19 4- abc 3x120+1x70+1x16 20 straightening of tilted pcc poles/st p/railsingle support of ht/lt line after opening of nuzzling, digging of pit applying anti direction force for making of proper alignment of line. 21 straightening of tilted d/p after opening of connection applying anti direction force, digging of dug for proper alignment of line including reconnection etc. complete. 22 opening of ht/lt connections & lowering of followingt/f from d/p/plinth and shifting up to in safer place. 23 1- 25/63 kva t/f 24 2- 100 kva t/f 25 dismanteling of old/damage stp/rs joistof ht/lt line andcarriage to store centre etah 26 re-sagging of loose 33/ht/lt conductor after opening, binding, nozzling etc. 27 1- dog/ raccoon/ rabbit conductor 28 2- aaac/acsr weasel conductor/ gi wire. 29 3- abc 3x120+1x70+1x16 30 4-abc 3x95+1x35+1x16 31 5-abc 3x50+1x35+1x16 32 replacement of following broken/damaged/missing accessories by new accessories including opening of the same and refixing. 33 1-11 kv cross arms v type 34 2-11 kv pin insulator 35 3-11 kv pin with nut 36 4-11 kv disc insulator 37 5-cross arms holding clamps 38 6-f clamps 39 7-lt shackle insulator 40 8-33 kv cross arm. 41 9-33 kv pin with nut 42 10- 33 kv pin insulator 43 retightening of stay rod. etc. complete. 44 providingfixing of stay rod with nuzzling etc. complete. 45 consumeable like nut & bolts of off size, cleaning chemical/material, cleaning clothes, insulating tape etc. will be required to complete the work shall be at contractor cost. 46 earthing of pcc/rs joist/stp as per respo norms. 47 carriage of old material from pit site to je store/store center, etah in distance range 0 to 10 km including loading & unloading and proper stacking. 48 mounting of following transformers on double pole/plinth including making of the connection etc complete. 49 1- 25/63 kva t/f 50 2- 100 kva t/f 51 chopping of tree branches 52 repairing/ resagging / new guarding of ht lines with gi wire as per respo norms