tender for work of line construction and line shifting of new electrical connections on the basis of rate contract through running trend in deposit scheme through nivesh mitra/jhatpat portal in the area of edd-syana, bulandshahr-2 carriage of fallowings from esc bsr to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 km. approx. 3 stp 11 mtr long & pcc 8.5 mtr from e.s.c bulandshahr to site 4 ct/pt unit 10/5a from esc. bsr to site 5 pilffer ressitant metering cubicle from esc. bsr to site with the help of crane. 6 tvm 11 kv 7 cable 3x70/3x120/3x185 sqmm 11 kv xlpe with the help of crane. 8 cable lt abc of sizes 9 carrage 25/63/100 kva tf 10 carriage of all line material from store to j.es store at sub station as acsr weasel conductor, gi wire, earth wire. m.s. chanel, angle, stay & earthig rods, barbed wire. disc insulator & pin insulator etc. 11 erection of single support including complete 1 i.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work. 12 erection of double pole support including complete 1 i.t. fittings as per respo manual and as per direction of engineer incharge including the cost of labour, t&p and carrier etc. required for proper completion of work. 13 grouting of single support shall be grouted with cement, sand and birck ballast/stone ballast in including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per respo manual and as per direction of engineer in charge including the cost of labour, t&p and carrier etc. required for proper completion of work. 14 grouting of double pole support shall be grouted with cement, sand and birck ballast/stone ballast in including the cost of cement, sand, birck ballast/stone 15 grouting of d/p for installation of ct/pt unit & t/f shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the 16 febrication cutting hole angle channel etc. 17 fixing of stay rod with stay wire in proper way with nozelling. 18 mounting & installation 25/63./100 kva t/f on the double pole 19 grouting of stay rods. 20 fixing of earthing rod. 21 laying of 3x70/3x120/3x185 sqmm 11kv xlpe cable putting sand around the cable fixing of bricks in both sides & top and refilling of trench and its proper ramming including 22 laying, sagging. stringing and binding and jumpering of acsr weisal, rabbit, dog newly erected poles as per respo manual and as per direction of supervising 23 laying, sagging. stringing and binding and jumpering of lt ab cable newly erected poles as per respo manual and as per direction of supervising 24 mounting ct/pt unit on d/p with the help of crane. 25 provided & fixing of cable box suitable for 3x70/3x120/3x185 sqmm 11kv xlpe. 26 providing & fixing holding clamps. 27 providing & fixing double pole clamps. 28 providing & fixing lt clamps. 29 providing & fixing stay clamps. 30 providing & fixing f-clamps. 31 providing & fixing stay insulator. 32 providing & fixing lt insulator. 33 providing nut & bolts off-size 34 installation & errection of piffer ressitant metering cubicle . 35 extra milage charges and carriage from pcc/st pole & other material from each 10 km. 36 all work will be done as per uppcl/respo rules. please enable macros to view boq information