tender for construction of kriya ghar situated at swaraj nagar ward 57 panki kanpur - earth work in excavation by mechanical means (hydraulic excavation)/ manual means in • foundations trench or drain (not exeeding 1.5m in width or 1osqm on plan) excavated soil as directed within a lead of 50m incl. dressing of sides and ramming of bottom lift upto 1.5m incl. getting out the all kind of soil 2 p/laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level- 1:6:12( l cement : 4 coarse sand zone-111 :8 grade stone aggregate 40inm nominal size 3 brick work with common burnt clay non modular bricks of class 150 in foundation and plinth in: cement mortar 1:4 (1 cement : 4 mortar) 4 p/l in position cement concrete of specified grade excluding the cost of centeringshuttering-all wrk up to plinth level 1:1.5:3 cement, co sand & 20mm stone aggregate nominal size 5 providing and layig damp proof course 25inm thick with cement concrete 1:2:4 (l cement :2 coarse sand (zone -iii ):4 graded stone aggregate 12.5mm nominal size) 6 rcc work in beams, suspended floors, roofs having slop up to 15 landing, balconies, shelves, chajjas, lintels, bands, plaing window sill staircases and spiral stair above plinth level upto floor five level excluding the cost of cerering shuttering finishing and reinforcement with 1:1.5:3(1 cement:1.5coarse: 3 graded stone aggregae) 7 centering and shuttering including strutting, proping etc, and removal of foundation, footing, bases of columns etc of mass concrete 8 suspended floors, roofs,landing, balconies, access platform 9 steel reinforcement for rcc work including straitening cutting bending placing in position and binding all complete upto plinth levelthermo mechanically treated bars of grade fe-500d 10 brick work with common burnt clay non modular bricks of class 150 in foundation and plinth in: cement mortar 1:4 (1 cement : 4 mortar) 11 p/l of g.s.b with road aggregate including spreadingin uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8-10 tones in stages to proper grade and camber, applying and brooming requisite type of screening binding materials to fillup the intersitces of coarse aggregates, watering and compacting to the required density 12 p/l 80mm thick interlocking tiles with stone dust including etc all comp 13 cement concrete flooring 1:2:4(1 cement : 2 coarse : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry etc all comnplete 40mm thick with 20mm nominal size stone aggregate 14 12 mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) plaster including etc all comp 15 finishing wall with putty appreoved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material labour t&p etc. required for proper competion of work 16 finishing wall with exterior paint(apex) of approved brand and manufacture and of required shade on undacorated wall surface to give een shade over @1.25ltr/10sqm including one coat of primer [email protected]/10sqm coat curing and cost of all material, labour t&p etc required for proper completion of work 17 p/l virtied tile in diferent sizes (thickness to be specified by the manufactrer) with water absorption less than 0.08@ and conforming to is:15622] of aproved make, in all colurs and shadesize of tile 600x600mm 18 p/f 1mm thick m.s sheet door with frame of 40x40x6mm angle iron and 3 mm m.s gusset plates at the junction and corners, all necessary fittings, complete, including applying a priming coat of approved steel primer.using m.s anglels 40x20x6mm for diagoinal braces 19 p/f m.s tube frame approved size by welding etc to sheet ladder railing, balcony, gate, railin, staircase railing and similar works including applying priming coat of approved steel primer-m.s tube 20 p/l precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by enginner-in char) 05mm total coated thickness with zince cooating 120gm per sqm as per is:277, primer on both side of the sheet and plyester top coat 15-18microns. sheet should have protective guard film of 25microns minimum to avoid scrateches during transportatin and should be supplied in single length upto 12m or as directed by engineer-in charge. 21 painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or grith or small articles not exceeding 0.10 sqm. in area hi glaoss apcolite, superlac dulux dspecified brushing to give and even shade and including the cleaning the surface of all dirt, duct and othe foreingn material sand papering and scrapping incl. cost of all material. labour, tools and plants, etc required for proper completion of work extra over item 2 and 2(a) above but for every coat on previously painted old surface 22 supply and fixing of rcc bench including etc all complete 23 s/f of 150mm ventilating fan all complete as per drawing and specification and direction of engineer in charge, make-crompton, havells, bajaj or equivalent ab 24 wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm rflspvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq. mm frls pvc insulated copper conductor single core cable etc as required. one light point with 5amp, switch, group c 25 s/f suitable size gi box with modular late and cover in front on surface ow in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular swithc, connection et, as required 26 s/f of power plug with 20amp/250 volt flush type modular switch and 5 pin 20a250 volt flush type universal modular socket switch on concealed m.s box including supply of all 27 supply and fitting of ceiling fan usha, khetan, bajaj isi including all complete 28 supply and installation 1.5 hp submercible pump incl. etc all comp 29 p/f wate closet squatting pan with 100 mm sand cast iron p or s trap, 10litre low level with p.v.c flusing cistern incl. flush pipe, with manuale flusingcistern incl. flush pipe with manuale controllerd devie handel lever and confroming to is: 7231 with all fitting and fixtures compl. incl. cutting and making good the wall and floor whereever requiredwhite vitrous chine orissa pattern w.c pan size 580x440mm with intral type foot rests 30 providing and fixing wash basin with ci brackets 15mm cp brass waste of standard patten, including painting of fitting and bracket cutting and making good the wall whereever required white vitreous china wash basin size 630x450mm with a pair of 15c.p bracket pillar type 31 providing and fixing pvc waste pipe from sink orwash basin including pvc waste fitting complete, semi rigid, 32mm dia/40mm di, cp brass fitting 32 providing and fixing unplastic pvc connection pipe with brass unions, 45cm length, 15mm nominal bore 33 providing and fixing cp brass long nose bib cock of approved quality weighting not less than 80grms15mm nominal bore 34 cpvc pip 150mm inner dia including filtering etc all complete 35 pvc water storage tank syntre or equivalent 36 pvc pipe 75 mm dia isi marked (working pressure 4kg/sqcm)