supply (other than key material 13 mtr poles and acsr panther conductor), erection, testing & commissioning of 2 km of 66 kv line on 13 meter st poles, 200mm2 acsr conductor in order to shift bainglad,rayian,samba-1 & samba-2 r/stns on 66kv 603 line emanating from 220/66kv gss samba-ii on turnket basis- 1 erection of 13 mtr. long pole (st-410- sp69) including transportation from divisional stores but excluding the cost of material 2 supply & erection of gi channel /angle x-arm including clamps on 13 mtr st poles as per approved design 3 laying & stringing of 200 mm² acsr conductor including transportation from divisional stores but excluding the cost of material 4 pg clamps for 200 mm² acsr conductor 5 11kv porcelain composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm 6 suspension fitting 7 tension fitting 8 galvanized nuts and bolts 9 danger plates with clamps 10 anti-climbing device with clamps 11 earthing complete by gi pipe 40 mm or gi rod 20mm 2.5 mtr long through gi strip. 12 red oxide 13 aluminium paint 14 cement bottoming 1:2:4 mix as per rec standards .7cum/pole 15 aluminium jointing sleeves 16 galvanised stay set with 50 x 8 mm stay clamp, guy insulator(2nos.), anchor plate (300x 300 x 8 mm), nut-bolts, 2 nos turn-buckles, 1.8m long, 20 mm diameter solid gs stay rod & 7/4.00 mm dia gi stranded wire complete 17 guard netting 18 66 kv ,630 amp, 25 ka,double break centre rotating type isolator (dbcr) without earthing blade,g.o isolator alongwith support insulators, operating mechanism, base channel down pipe & all required accessories complete