design, engineering, manufacture, survey, supply, transportation, erection, testing & commissioning for shifting/re-alignment of 33kv ganika line at akramabad, doda in district doda.” under the jurisdiction of executive engineer, sub transmission division doda, jpdcl jammu = 1 a-supply part 2 a-supply part(shifting/realignment of 33kv ganika line at akramabad doda) 3 new33 kv line 4 11 mtr. long st pole (for new line) st-410 sp56 5 gi channel x-arm including clamps and braces 6 150 mm² acsr conductor 7 33kv polymeric composite pin insulator 36kv, 10kn,lighting impulse 170kv positive and 180kv negative, creepage distance 900mm 8 33kv polymeric composite disc insulator 36kv,min failing load 90kn, lighting impulse 170kv positive and 180kv negative, creepage distance 900mm with fittings 4 bolts 9 galvinized nuts and bolts. 10 danger plates with clamps 11 anti-climbing device with clamps 12 earthing complete by gi pipe 40 mm or gi rod 20mm 2.5 mtr long through gi strip. 13 red oxide 14 aluminium paint 15 cement bottoming 1:2:4 mix as per rec standards .6cum /pole 16 galvanised stay set with 50 x 8 mm stay clamp, guy insulator(2nos.), anchor plate (300x 300 x 8 mm), nut-bolts, 2 nos turn-buckles, 1.8m long, 20 mm diameter solid gs stay rod & 7/4.00 mm dia gi stranded wire complete 17 b-erection part (shifting/realingment of 33kv ganika line at akramabad doda) 18 11 mtr. long st pole(for new line) st-410 sp56 19 gi channel x-arm including clamps and braces 20 150 mm² acsr conductor 21 33kv polymeric composite pin insulator 36kv, 10kn,lighting impulse 170kv positive and 180kv negative, creepage distance 900mm 22 33kv polymeric composite disc insulator 36kv,min failing load 90kn, lighting impulse 170kv positive and 180kv negative, creepage distance 900mm with fittings 4 bolts 23 galvinized nuts and bolts. 24 danger plates with clamps 25 anti-climbing device with clamps 26 earthing complete by gi pipe 40 mm or gi rod 20mm 2.5 mtr long through gi strip. 27 red oxide 28 aluminium paint 29 cement bottoming 1:2:4 mix as per rec standards .6cum /pole 30 galvanised stay set with 50 x 8 mm stay clamp, guy insulator(2nos.), anchor plate (300x 300 x 8 mm), nut-bolts, 2 nos turn-buckles, 1.8m long, 20 mm diameter solid gs stay rod & 7/4.00 mm dia gi stranded wire complete 31 part-c dismantling of existing 33kv line including carriage and handing over the material in divisional stores std doda