tender for watershed structures - package no. 02, block - bikaner, gram panchayt - katriyasar, work-construction of 21 farm pond - excavation work by jcb machine/tractor with scraper, breaking of clods of excavated soil, sorting of grass & pebbles and maintaining section/profile of bund (in cut area) including lifting and lowering of initial lead 250 m and lift upto 3 m. draft based on chapter 5th of irrigation page number 32 to 34 (valid from date 01/02/2017) unit 1 cubic meter. machinery work soft soil (gkn bsr item no. 196)2 excavation of soil up to 1.5 m depth in foundation, trench, drain, compaction of the bottom, watering, arranging the sides, removing the excavated soil, filling the voids with soil again after filling the foundation and disposal of the remaining soil up to a distance of 50 m (gkn bsr item no. 2a)3 foundation and base masonry with first class brickwork in cement-gravel 1:6 or 1:8 mortar, including filling the side cracks and leveling. (gkn bsr item no. 20a4 20 mm thick plaster on roof in cm 1:6 including 14 days curing complete in all respect (bsr item no. 77 c)5 write work related information with good qualityenamel paint on pytan outer surface in 3 layers to give even shade (bsr item no. 82a)6 preparation and dressing the sub grade including removal ofirregularities up to 7.5 cm in soil, morrum mixed with pebbles, small boulders and kankar & murrum for(b) side slopes (wrd item 14b chapter ix)7 supply of 500 htp hdpe geo membrane bis 15351/2015 (including gst 18%) (horticulture department circular 3965-4050 date 23.12. 2021)8 laying, welding & testing of 1 mm hdpe liner (wrd item 45 chapter v)9 fencing of 150cm height with iron posts of 35x35x5mm placed 3m apart and 30cm deep in the ground using cement concrete 1:3:6 (0.30x30x.60m) corners and every 10th post supported by 35x35x5mm iron posts, along with black barbed wire in 4 lines, tying and fitting with gi staple wire between 2 posts. analysis for up to 27m length fencing, including earthwork (0.54cm concrete) (gkn bsr item no. 195 b)10 iron work for grills/gates etc. including cutting, mounting and fixing of flat corners, ts and corrugated (channel) etc. (for display board) (gkn bsr item no. 63)