different type of electricity works basis in the system improvement scheme. edd nakur-2 safely cartage ofpcc / stpoles up to ( 11 mtr. long ) fromesc, sreto the site of workincluding loading & unloading at both ends 3 safely cartage of acsr rabbit conductor with othercomplete line material ( except pcc / st poles 11 mtr. long ) from esc, sreto the site of workincluding loading & unloading at both ends. 4 safely cartage oflt abc ( 3x120+1x95+1x16 / 3x95+1x70+1x16 / 3x50+1x35+1x16 ) sq.mm cable fromesc, sre to the site of work including loading & unloading at both ends 5 safely cartage of new 63 kva t / f from esc, sre, to the site of work including loading & unloading by private crain at both ends 6 safely cartage of new 100 kva t / f from esc, sre, to the site of work including loading & unloading by private crain at both ends 7 safely cartage of new 250 kva t / f from esc, sre, to the site of work including loading & unloading at both ends 8 safely cartage of new 11 kv outgoing vcb ctr 200 / 100, 5 amp. from esc, sre, to the site of work including loading & unloading by private vehicle at both ends 9 erection of single pcc / stpoles up to 11 mtr. long with completing fitting of all accessories of 11 kv line as per respo specifications. 10 febraction of double pole ( 11 / 8.5 mtr. long ) on pcc / st poles with complete fittingofbracings & other accessories as per respo specifications. 11 grauting & fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling with stay wire 7 / 8 swg and fitting the same on the pole 12 laying, lifting, stringing, sagging jumpering & binding of acsr rabbit conductor on st polefor 11 kv line as per respo specifications. 13 earthing of pcc / st poles by earthing rod 20x2500 mm as per respo specifications. 14 grouting o f pcc / st pole after digging of pits in block 16x1800mm in ratio 1:4:8 with ist class brick ballast good quality dry river . 15 providing x-arm clamp, e- clamp, channel & angle clamp, & guarding clamp for st poles made of new ms flat size 65x8 mm with nut & bolt as per respo specifications. 16 providing & fixing pg-clamp, for pcc poles made of new ms flat size 65x6 mm with nut & bolt as per respo specifications. 17 providing & fixingsuspension-clamp, for pcc / st poles made of new ms flat size 65x6 mm with nut & bolt as per respo specifications. 18 making of breakets with ms channel / angale complete all respect. 19 providing& fixing of lt clamps for pcc / stppoles with nuts bolts made of new ms flat iron 50x6 mm with nuts bolt. 20 providingofj-hook clamppcc / stppoles with nuts bolts made of new ms flat iron 50x6 mm with nuts bolt. 21 providing & fixing prc connector size 50 / 35 sq mm. 22 fixing of distribution box of single phase / 3-phase on pcc pole with providing suitable clamp and connection above distribution box with abc cable connecting jumpering including with service connection. 23 digging of trench 1.5 mtr. deepand laying of 2 no. parreral hdpe pipe 150 mm dia on 1 meter distance with providing of hdpe and laying of 2 no. parreral 11 kv xlpe cable 3x185 sq mmin the hdpe pipe 150 mm dia on 1 meter distance the work includes digging laying of cable in underground trenches, back filling of earth, spare length of cable shall be left over and laid in the trenches in shape of 6m rings at both ends. where the cable is to be laid across pucca / main road, 150mm dia g.i pipe will be weared over the cable in the trench for the protection of cable. 24 providing and filling the cable jointing kit indore & outdoor type size3x185 sqmm. sq.mm as per respo specification. 25 laying, lifting, stringing, proper sagging abc cable of size ( 3x120+1x95+1x16 / 3x95+1x70+1x16 / 3x50+1x35+1x16 ) sq.mm. including fixing of all type clamps and connector . 26 shifting, fixing and installation of 11 kv01 no o / g vcbat 11 kv s / s manakmau complete with proper alignment and concreting all respect and making cable connection. 27 removal of 25 / 63 / 100 kva t / f from the existing d / p after opening ht & lt connection and with shifting the t / f from the site to esc sre with loading & unloading at both ends. 28 dismantaling of old & used 11 o / g vcb carrige from 33 / 11 manakmau to esc sre with including loading & unloading at both ends. 29 providing & fixing steel make good quality lock 30 safely installation ofnew 63 / 100 kv t / f on the d / p with proper alignment and complete fitting including making connection 11kv / lt line . 31 constriction of plinth for installation of 250 kv t / f of size 1.5x1.5x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thickrcc top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall as per respo specificaiton. 32 safely installation ofnew 250 kv t / f on the plinth with proper alignment and complete fitting including making connection 11kv / lt line commissioning. 33 water lavel earthing of 250 kva t / f by boring 60 ft. deep and fixing 60 ft. gi pipe 1 / 2 dia ( zindal class b ) and connectingwith gi strip of size 40x5 mm. at the bottom of gi pipe to thet / f with providing of requireed charcoal and salt in the pipe . 34 removal of acsr weasel conductor from the existing 11kv / lt lines with making roll of conductor and safely carrige from site to esc, sre / j.e ( store ) including loading and unloading at both ends. 35 off shooting of tree branches for clearence of proposed33 / 11 kv line. ( approx 13 km line ) .