tender for running contract work of full deposit work under edd i sre-2 safely cartage ofstpoles sp-55, 13 / 09 mtr.long fromesc, sreto the site of workincluding loading & unloading at both ends. ( distance upto 25 km. ) 3 safely cartage of complete line material ( except st poles, xlpe cablel ) from esc, sreto the site of work / dumping place / other place to local dumping ground or 33 & 11 kv s / s / other place of siteincluding loading & unloading at both ends. ( dist. upto 25 km. ) 4 safely cartage of11 kvxlpe of size 3x120 sq mm cable fromesc, sre to the site of work including loading & unloading at both ends. ( distance upto 25 km. ) 5 erection of single stpoles sp-55, 11 mtr. longwith complete fitting of all accessories of 33 kv line as per respo specifications. 6 fixing of 11 kv stay rods by digging of pits in block of 600x600x300 mm. &with new brick and nozzling of stay wire 7 / 10 swg and fitting the same on the pole 7 laying, lifting, stringing, sagging jumpering & binding of acsr rabbit conductor on st polefor 11 kv line as per respo specifications. 8 earthing of st poles by earthing rod 20x2500 mm as per respo specifications. 9 grouting of st poles sp-55, 11 mtr.long with cement concreting in bolck of 600x600x1500 mm. in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5 with plinth. 10 providing and fixing all type clamp, channel & angle clamp, & guarding clamp for st poles made of new ms flat size 50x6 mm. 11 providing and fixing of stone ped 300x300x75 12 providing and fixing ms nuts & bolts & washers off size 13 providing and fixing of gi barbed wire on the each pole. 14 providing and fixing of 6 zindal b class iron pipe 15 providing and fixing of aluminum tap 16 providing of hdpe pvc pipe 150 mm dia 17 providing and fixing 11 kv danger board withclamp for st poles made of new ms flat size 40x5 mm with nuts & bolts. 18 providingof aluminum paint ( british / asian / enamel paint ) 19 providing ofred oxide paints ( british / asian / enamel paint ) 20 painting ofst poles 11 mtr, sp-55with 2 coats of synthetic enamel paint after one coat of ready mix primer as well as rubbing / cleaning of surface as required for proper completion of work. and remaining by aluminium paint including all channels / clamps etc. 21 laying of 11 kv xlpe cable 3x120sq.mm in the 6 inch zindal b class iron pipe. 22 digging of trench 1.5 mtr. deepand laying of 2 no. parreral hdpe pipe 150 mm dia on 1 meter distance by drill machine. 23 laying of11 kv xlpe cable 3x120sq mm in the hdpe pipe 150 mm dia on 1 meter distance. 24 providing of 11 kv heat shrinkable jointing kitoutdoor & indoor of size 3x120 sq mm. ( denson make, raychem make ) 25 fixing & making of 11 kv cable heat shrinkable terminationskits of size 120 sqmm ofoutdoor & indoor side. 26 removal of acsr rabbit / weasel conductor ( 15 kg ) from site to esc sre including loading and unloading at both ends