tender for earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed by the engineer-in-charge at site according to the hp.pwd specification including all incidental charges. ic all leads, lifts & carraige of material , providing form work with steel plates 3.15 mm (three point fifteen) thick welded with angle iron in frame 30x30x5 mm. so as to give a ffair finish centring, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centring below supporting floor to ceiling not exceeding 4mtrs (four meter) and removal of the same for in situ- reinforced concrete & plain concrete work in iic all leads, lifts & carraige of material. , lintels, beams, plinth beams, girders, bressumers and cantilevers , suspended floors, roofs, landings balconies and access platform , columns, pillars, piers abutments, posts and struts , edges of slabs and breaks in floors and walls (1) under 20 cm. (twenty centimeter) wide , providing and laying concrete for plain freinforced concret in open foundation complete as per drawings and technical specifications mord clause 802.603 1202 41203 plain cement concrete nominal mix 1.5.10 (1 cement 5 sand 10 aggregates-40mm)including camage of materials in all leads and lifts and as per the direction of engineer in charge , reinforced cement concrete work in beams suspended floors roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1.15.3(1 cement 15 coarse sand) 3 graded stone aggregate 20 mm nominal size) including carnage of materials in all leads and lifts and as per the direction of engineer-in-charge. , providing mild steel/tor steel for reinforced cement concrete work including bending, inding and placing in position complete. (b) mild steel medium tensile steel bars including all leads, liftes & carraige of material.