supply, installation, testing and commissioning of cctv surveillance system at 140 warehouse locations-2 supply & erecting of high defination 5 mp ip ir bullet camera with sensor : 1/3, progressive scan, 5.0 megapixel, cmos, lens : [email protected]/ [email protected], shutter speed : auto/manual, 1 ~ 1/100000s, digital noise reduction : 2d/3d dn, day/night : ir-cut filter with auto switch (icr), minimum illumination: colour: 0.03lux (f2.0, agc on) 0lux with ir, ir range : up to 30m (98ft) ir range, s/n : >56db, defog:digital defog , wdr: dwdr/ true wdr, resolution : 5 mp or better ( 2592x1944), video compression : h.265 / h.265+, high light compensations : true, back light compensations :true,network : 1 rj45 100m base-tx ethernet, audio : audio in / out support,power : 12v dc / poe, housing : ip67 , certification : vendor should submit mfr. test certificate,cyber security : aes 256-bit encryption, configuration encryption, trusted execution, digest, security logs,wsse ,account lockout,syslog, video encryption, ip/mac filtering ,https,trusted upgrade,trusted boot., anr support : yes with 512 gb for details technical specification no 13. 3 supply, installation, testing and commissioning of 8 channel network video recorder with processor : quad-core embedded processor, ip camera input : 8 channels, operating system : embedded linux, two-way talk : 1 channel input, 1 channel output, rca, user interface : gui, video output : 2 hdmi, 2 vga, compression : smart h.265+/h.265/smart h.264+/h.264/mjpeg, decoding capability : 8-ch@1080p(30fps), 16-ch@1080p(30fps), osd : camera title, time, camera lock, motion detection, recording, video resolution : hdmi: 3840 × 2160 , 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768 and vga: 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768, video recording : max 160 mbps, video display split : 1st screen: 1/4/8/9/16, 2nd screen: 1/4/8/9, motion detection : md zones: 396(22×18). video loss: supports, camera blank : supports,hard disk : 2 sata ports, up to 10tb each, 1 esata port, smart phone : iphone, ipad, android phone, trigger events : recording, ptz, tour, alarm, video push, email, ftp, snapshot, buzzer & screen tips, recording mode : manual; schedule (general; md; alarm; md & alarm; intelligent; pos), search mode : time /date, alarm, md and exact search (accurate to second) , bit rate : 16kbps ~ 20mbps per channel , sync playback : 1/4/9/16 , playback : play, pause, stop, rewind, fast play, slow play, next file, previous file, next camera, previous camera, full screen, repeat, shuffle, backup selection, digital zoom , backup mode : usb device/network, interface ports : 2 usb ports (1 rear usb 3.0 , 1 front usb 2.0 ), 1 rs232, 1 rs485 , max user account : 128 users , record interval : 1~120 min (default: 60 min), pre-record: 1~30 sec, post-record: 10~300 sec , ethernet : 1 rj-45 port (10/100/1000mbps) , protocols : http, https, tcp/ip, ipv4/ipv6, upnp, snmp, rtsp, udp, smtp, ntp, dhcp, dns, ip filter, pppoe, ddns, ftp, alarm server, ip search , onvif 2.4, sdk, cgi , power supply : single, ac 100~240v, 50/60 hz/single, dc12v/4a , power consumption : <9.5w (without hdd) , certification : ul,ce,fcc,bis for details technical specification no 16. 4 supply, installation, testing and commissioning of 16 channel network video recorder with processor : quad-core embedded processor, ip camera input : 16 channels, operating system : embedded linux, two-way talk : 1 channel input, 1 channel output, rca, user interface : gui, video output : 2 hdmi, 2 vga, compression : smart h.265+/h.265/smart h.264+/h.264/mjpeg, decoding capability : 16-ch@1080p(30fps), osd : camera title, time, camera lock, motion detection, recording, video resolution : hdmi: 3840 × 2160 , 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768 and vga: 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768, video recording : max 300 mbps or better, video display split : 1st screen: 1/4/8/9/16, 2nd screen: 1/4/8/9, motion detection : md zones: 396(22×18). video loss: supports, camera blank : supports,hard disk : 4 sata ports, up to 16tb each, 1 esata port, smart phone : iphone, ipad, android phone, trigger events : recording, ptz, tour, alarm, video push, email, ftp, snapshot, buzzer & screen tips, recording mode : manual; schedule (general; md; alarm; md & alarm; intelligent; pos), search mode : time /date, alarm, md and exact search (accurate to second) , bit rate : 16kbps ~ 20mbps per channel , sync playback : 1/4/9/16 , playback : play, pause, stop, rewind, fast play, slow play, next file, previous file, next camera, previous camera, full screen, repeat, shuffle, backup selection, digital zoom , backup mode : usb device/network, interface ports : 2 usb ports (1 rear usb 3.0 , 1 front usb 2.0 ), 1 rs232, 1 rs485 , max user account : 128 users , record interval : 1~120 min (default: 60 min), pre-record: 1~30 sec, post-record: 10~300 sec , ethernet : 1 rj-45 port (10/100/1000mbps) , protocols : http, https, tcp/ip, ipv4/ipv6, upnp, snmp, rtsp, udp, smtp, ntp, dhcp, dns, ip filter, pppoe, ddns, ftp, alarm server, ip search , onvif 2.4, sdk, cgi , power supply : single, ac 100~240v/single, dc12v/4a , 50/60 hz , power consumption : <16.7w (without hdd) , certification : ul,ce,fcc,bisfor details technical specification no 15. 5 supply, installation, testing and commissioning of 32 channel network video recorder with processor : quad-core embedded processor, ip camera input : 32 channels, operating system : embedded linux, two-way talk : 1 channel input, 1 channel output, rca, user interface : gui, video output : 2 hdmi, 2 vga, compression : smart h.265+/h.265/smart h.264+/h.264/mjpeg, decoding capability : 32-ch@1080p(30fps), osd : camera title, time, camera lock, motion detection, recording, video resolution : hdmi: 3840 × 2160 , 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768 and vga: 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768, video recording : max 320mbps, video display split : 1st screen: 1/4/8/9/16/25/36, 2nd screen: 1/4/8/9/16, motion detection : md zones: 396(22×18). video loss: supports, camera blank : supports, hard disk : 4 sata ports, up to 20tb each, 1 esata port, smart phone : iphone, ipad, android phone, trigger events : recording, ptz, tour, alarm, video push, email, ftp, snapshot, buzzer & screen tips, recording mode : manual; schedule (general; md; alarm; md & alarm; intelligent; pos), search mode : time /date, alarm, md and exact search (accurate to second) , bit rate : 16kbps ~ 20mbps per channel , sync playback : 1/4/9/16 , playback : play, pause, stop, rewind, fast play, slow play, next file, previous file, next camera, previous camera, full screen, repeat, shuffle, backup selection, digital zoom , backup mode : usb device/network, interface ports : 2 usb ports (1 rear usb 3.0 , 1 front usb 2.0 ), 1 rs232, 1 rs485 , max user account : 128 users , record interval : 1~120 min (default: 60 min), pre-record: 1~30 sec, post-record: 10~300 sec , ethernet : 1 rj-45 port (10/100/1000mbps) , protocols : http, https, tcp/ip, ipv4/ipv6, upnp, snmp, rtsp, udp, smtp, ntp, dhcp, dns, ip filter, pppoe, ddns, ftp, alarm server, ip search , onvif 2.4, sdk, cgi , power supply : single, ac 100~240v, 50/60 hz , power consumption : <16.7w (without hdd) , certification : ul,ce,fcc,bisfor details technical specification no 14. 6 supplying & erecting 8 tb internal surveillance hdd suitable for sata port of nvr, interface transfer rate 6 gb/s, maximum sustained transfer rate 210 mb/sec to 213 mb/s. drive bay supported 08+, cameras supported up to 64, cache (mb) 256, load/unload cycle -3000000, work load rating per year 180tb, mtbf 1000000 hrs. https. rohs, ul, ce certified, duly erected in position in provided nvr as per specification no. cctv-hdd 7 supplying & erecting( 32 monitor ) 32 professional led display with 1920*1080 (full hd) display, suitable for 16/32 channel nvr and following features brightness: minimum 250 cd/m2 contrast ratio: minimum 1000:1 viewing angle: 178/178 deg. response time: maximum 8 ms inputs: hdmi, vga, bnc,usb, audio in, built-in speakers maximum 2 w, suitable to operate on 100-240 v 50 hz ac supply and 24/7 duty cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc.complete. 8 supplying & erecting (43 monitor ) 43 professional led display with 1920*1080 (full hd) display, suitable for 16/32 channel nvr and following features brightness: minimum 500 cd/m2 contrast ratio: minimum 1000:1 viewing angle: 178/178 deg. response time: maximum 8 ms inputs: hdmi, vga, bnc,usb, audio in, built-in speakers maximum 10 w, suitable to operate on 100-240 v 50 hz ac supply and 24/7 duty cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete. 9 supplying & erecting (49 monitor ) 49professional led display with 1920*1080 (full hd) display, suitable for 32/64 channel nvr and following features brightness: minimum 500 cd/m2 contrast ratio: minimum 1000:1 viewing angle: 178/178 deg. response time: maximum 8 ms inputs: hdmi, vga, bnc,usb, audio in, built-in speakers maximum 10 w, suitable to operate on 100-240 v 50 hz ac supply and 24/7 duty cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete. 10 supplying, erecting & terminating 5 m hdmi cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin hdmi connectors complete. 11 providing & erecting 7 m high (clear height) galvanised each octagonal pole with foundation bolts having bottom of 130 mm a/f, top 70 mm a/f on provided foundation as per specification no.oh-pl/opl. 12 making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mmstonemetal,(45 x45 x45)cm/45cmdia.x45cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) 13 supplying and erecting lshape mounting for camera (extender) etc complete as directed by engineer in charge. 14 supplying , fixing and configuring ethernet managed ethernet each switch of minimum of 24 ports 10/100/1000 base-t poe+ ports with min 180w power and 2x 1g sfp portsand 1 x out of band ip based management port with cl1 provided, switch of min. 36 gbps or morewith non-blocking architecture forwarding rate of 26.8 mpps rack, equipped with minimum 512mb ram and 128mb flash, should have led indicator for per port status, fan, psu and management status and sustain 0°c to 50°c ot and 10% to 95% rh as directed. it should support for ipv6 , cover transmission distance of 250 meter. the swithching and routing should have 16 k mac address, 255 active vlans, 802.1d spanning tree, 802.1w, 802.1s, should have bpdu guard, support aggregating and load balancing, 802.1 ak for dynamic vlan propagation, local and remote port mirroring, link layer discovery protocol (802.1ab), mac address tracking and address addition, delete or movement. the secutrity la database for radius authentication for 802.1x login, ssh-2, scp for secure management, dynamic arp inspection, dhcp snooping with min50 acl entry support. management should consist scheduled archiving / uploading of configuration and system log to a central server, auto-install support for firmware images and configuration files and vendor shouldsubmit mfr test certificate along with supply as directed by engineer in chargeas per technical specification no. 1 complete. 15 supplying , fixing and configuring ethernet managed ethernet each switch of minimum of8 ports 10/100/1000 mbps poe+ 2 nos of1g sfp ports, 2 uplink ports, protocol: ieee802.3af, ieee802.3at, hi-poe, consumption of poe budget: 120 w, with switching capacity 20 gbp, fr rate 11.90 mbps, buffer memory 1.5mb, should covertransmission distance 250 meter, mac address list- 8k. the lighting protection 6kv, working temperature –10° c to 55° c (14° f to 131° f), electromagnetic- fcc cfr 47 fcc part 15 subpart b, conforms to ce standards. vendor should submit mfr test certificate along with supply as directed by engineer in chargeas per technical specification no. 2 complete. 16 supplying & erecting mode sfp transceiver of single lc receptacle optical interface compliant with 7db gainetc model, hot-pluggable sfp footprint type, ow of 1310nm fp laser transmitter, standard rohs compliant and lead free, should reach up to 10 km on 9/125um smf, with metal enclosure for lower emi, low power dissipation <600mw, should sustain 0~50°c, same as switch make, vendor should submit mfr test certificate along with supply and complete as directed by engineer in chargeas per technical specification no. 3 complete. 17 supplying and installing utp cat6 copper cablesuitable for networking of type 23 awg solid bare copper, unshielded twisted 4 pair, category 6, lszh jacket complying to testing, cable outer diameter of 5.8mm, frequency 600 mhz; etl test reports of ansi/tia-568-c.2 & iso/iec 11801 of cable performance upto 600 mhz provided conduit/casing-n-cappingas directed by engineer in charge and per technical specification no. 11. 18 supplying, installing and testing utp connector (rj-45) as per specification no. wg-nas/utpc 19 supplying and fixing 1 m utp patch cordof cat 6 type electrical performance guaranteed to meet or exceed tia/eia 568-b 2-1 category 6 and iso /iec category 6/class,certification ul listed, ul-c certified, different color (green, orange and red with connector complete as directed by engineer in charge and submit mfr test reportas per technical specification no. 12 complete 20 supplying & laying hms pvc conduit 25mm dia with necessary accessories in rcc work/false ceiling/false flooring as per specification no. wg-ma/cc. 21 supplying and installing 6 core optical fiber unarmored cable unitube gel filled for access outside building single mode, 9/125 microns, bending radious of not more than 20x , 10 gbps speed compliant to iec 60793/iec 60794 standards, change in attenuation < = 0.05 db/km, tensile strength >=300 n, maximum crush resistance 1000 n/100mm,ot of -300 c to 500 c, storage temperature of -400 c to 550 c, of standards iso/iec11801 tia/eia-568-b, vendor should submit mfr test certificate along with supply complete as directed by engineer in chargeas per technical specification no. 6 complete. 22 power cable (mcb with closed box, single phase) -supplying & erecting mains with 2x2.5 sq.mm frlsh copper m pvc unarmoured cable provided conduit/trunking/inside pole/bus bars or any other places. as per technical specification no: 17 23 pvc conduit with hanging wire -supplying & laying hms pvc conduit 32 mm dia. with necessary accessories in rcc work/false ceiling/false flooring as per specification no. wg-ma/cc. (1-1-12) 24 supplying and fixing 6 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided u rack complete as per specification no. wg-nas/ liu 25 supplying and fixing liu 12 port loaded sm with sc connectors ports provision for 12 nos. of sc termination. light guide unloaded interconnect unit, rack mounted type, with adapter panel fully loaded with sctype duplexfor termination of optical fiber cables, 19 rack mountingin provided u rack complete as per technical specification no. 7. 26 supplying and erecting 12 core fibre termination box (external rack) suitable for fttx application,ip67 grade, accepts up to 12 fusion splice, splice tray should be with adaptors and couplers as per requirement, pvc, material of solid and fully-closed structure of dust-proof, pleasing and neat appearance, ferruling of each core as per standards provided at the time of installation etc complete as directed by engineer in charge.vendor should submit mfr test certificate along with supplyas per technical specification no. 8 complete. 27 supplying and erecting 6 core fibre termination box (external rack) suitable for fttx application,ip67 grade, accepts up to 6 fusion splice, splice tray should be with adaptors and couplers as per requirement, pvc, material of solid and fully-closed structure of dust-proof, pleasing and neat appearance, ferruling of each core as per standards provided at the time of installation etc complete as directed by engineer in charge. vendor should submit mfr test certificate along with supplyas per technical specification no. 8 complete. 28 supplying and installing single mode simplex pigtail with sc/lc splicing, sc connector with single mode fiber pigtail (to be used for arc fusion splicing with fiber cores termination inside liu/fiber interconnecting panel.) pigtail consists of pre-moulded/prefabricated sc type fiber connector at one end & another end fiber core with approx. 1 meter length as directed and vendor should submit mfr. test certificate along with supplyas per technical specification no. 10 complete 29 supplying and erecting duplexofc patch cord sc-lc typefibre patch cord, sc-sc /sc-lc duplex, of 1 meter lengthetc complete as directed by engineer in charge. vendor should submit mfr. test certificate along with supply.as per technical specification no. 9 complete 30 supplying and fixing 6uwall mount rack or better, two vertical and 2 horizontal cable managers, pd of 5 points- 5 amp socket, depth of 550 mm or as per nvr sizing, aluminum extruded profile,compliance ce & rohs , glass door in front with lock, with min 2 fans for outdoor,19” equipment mounting or extra width, with 1 tray, should confirm standard of din41494 or equivalent iso9001:2015 and 14001:2015. vendor should submit mfr test certificate along with supply as directed by engineer in charge as per technical specification no. 5 complete. 31 supplying and fixingoutdoor 4uwall mount rack or size as per requirement; bidder to study each pop location and confirm size in technical and commercial offer, one vertical and one horizontal cable manager if required, power distrubution with min 3 points- 5 amp socket or as per site requirement, depth of 400 mm, aluminum extruded profile , ip rating of 67 if outdoor use,glass door in front with lock or metal door with perforations, fan type ventilation to be provided for outdoor unit as per requirement at site. vendor should submit mfr test certificate along with supply as directed by engineer in charge as per technical specification no. 4 complete. 32 supplying, erecting, testing and commissioning of 2kva online ups with isolation transformer& 2 kva = 2 kw capacity online pure sine wave ups, with batteries pwm & igbt based, with 0.9 to unity output pf complete with all protections as per technical specification no. 18 complete.